Pes cartridges are made of sulfonated pes(polyether-sulfone) polymers. It offers an absolute membrane filtration with pore size from 0.04 to 1.2 micron.It is a highly recommended quality product to be used in various applications including food& beverage industries, process water treatment in micro-electronic, bio-technology and pharmaceutical plants.The high asymmetrical pore structure of pes membrane offers absolute filtration, high dirt holding capacity, lower pressure drop and increasing the filtration performance to give higher filtrate throughputs and higher flow rates than symmetrical membrane.Features and advantages- high flow rates due to highly asymmetric pore structure.- inherently hydropilic.- wide range of chemical compatibility.- available in wide range of absolute pore sizes.- parts and supporting layers are made of 100% pure fda approved silicone-free non foaming pp.- all materials are fda listed.- 100% integrity tested.- various end configurations to fit any standard housings.- manufactured in clean room environment(class 10k).- a guaranteed quality product(iso 9001 certified).Technical specifications- micron rating:0.04,0.1,0.2,0.45,0.65,0.8& 1.2 micron- filtration media: Hydrophilic high asymmetric polyether-sulfone membrane- support layers:100% pure fda approved silicone-free non foaming p. P. Microfiber.- core& cage: P. P. High density polyethylene.- end caps: P. P. High density polyethylene.- o-ring& gaskets: Silicone, epr, viton and teflon encapsulated type.- nominal od/od:2.68 inch(68mm)/1.3 inch(33mm)- nominal length:5 to 40 or 125 to 1016mm- filtration area:0.58 to 0.62 m2/10 depends on micron ratingOperating condition- max. Operating temp.:80 degree c at 4.1 bar(60 psi)- max. Forward diff. Press.:4.1 bar(60 psi) at 25 degree c.- max. Reverse diff. Press.:2.1 bar(30 psi) at 25 degree c.- sterilization: In situ steam or autoclave to 120 degree c(30 minutes) for a maximum accumulatedExposure of 10 hours at max. Diff. Press. Of 7 psi(0.5 bar). Alternatively, pes is sanitized withCompatible chemical agent.- pre-rinsing: Pes is pre-rinsed with 18mega-cm d. I. Water.- rinse-up: Cartridges will be rinsed-up to 18 mega-cm d. I. Water with a minimum of throughput.- min. Buble point:0.04 micron > 40.6 psig(ipa),0.1 micron > 29.9 psig(ipa),0.2 micron > 62.4 psig(water),0.45 micron > 43.5 psig(water),0.65 micron > 27.6 psig(water),0.8 micron > 21 psig(water),1.2 micron > 15.2 psig(water)
Pes cartridges are made of sulfonated pes(polyether-sulfone) polymers. It offers an absolute membran
GA series polyethersulfone (PES) membrane filter is designed to provide greater bacteria and particle removal at high flow rates and low pressure drops in a wide range of biological fluids. It offers the greatest assurance of filtration performance, stability and service ...
Come From NanJing Green Forest Machine Co.,LTD
The MCE membrane pleated filter ...
Come From Hawach Scientific Co.,Ltd.
1.Applied for 50-600G ro membrane elements rolling production 2.Max Capacity:500-700pcs/8 working hours 3.Glue dispensing type: Automatic 4.Tension control type: Magnetic powder brake 5.Glue track programming :Telta / Mitsubishi PLC system 6.Tricot cutting: Automatic 7.Ro ...
1.Type: produce water filter cartridge -ro membrane elements from 50-600 G (1810S-3213S) 2.Fully automatic Glue dispensing working area:1000mm(X)*500mm(Y)*150MM(Z) 3.Glue Volume Controlling system: stepping motor +gear pump 4.Pipe and tricot welding model :Ultrosonic welding ...
1.Mitsubishi PLC intelligent Glue dispensing system 2.Applied for 50-600G RO membrane Elements rolling 3.Auto cutting for Tricot 4.Auto adhesive tape Rolling 5.Auto adhesive tape cutting 6.Capacity 700-1000 pcs/day 7.Easy Operate ,even for New worker 8.Low Reject Rate ...
PVC filter system can be widely used sewage and wastewater reuse, desalination, electronics and other fields. It is character with high flow, long working life and good operation of complex liquid. It consists of the housing and the cartridge. It can install high flow cartridge ...
【 PP Pleated filter cartridge material 】: 1、Material:Polypropylene 2、Supporting layer:Polypropylene 3、End caps:Polypropylene 4、Center rod: Polypropylene 5、Gasket:EPDM、silica gel ,NBR,Viton etc; 6、O-ring:Silica gel、EPDM,NBR,Viton etc。 【PP ...
YTGF series filter adopts superfine glass fiber materials, with large pollutants holding capacity and the inherent adsorption ability, especially suitable for filtering with colloid, oils and high content of liquid with particulate matter. Made of super fine glass fiber, low ...
Come From Shijiazhuang Yitong filter equipment manufacturing co., ltd
Product Description Using nylon (N6 / N66) microfiltration membrane as filter medium, has high filtration precision, hydrophilic, easy to wetting, good strength & toughness, excellent chemical compatibility, especially suitable for various kinds of solvents, chemicals filtering. ...
Come From Shijiazhuang Yitong filter equipment manufacturing co., ltd
YTPVDF Series-Polyvinylidene fluoride(PVDF) pleated filter cartridge Product Description YTPVDF Series PVDF membrane filter cartridge adopts reinforced PVDF micro pores membrane as medium. Performance features With excellent heat resistance, oxidation resistance, corrosion ...
Come From Shijiazhuang Yitong filter equipment manufacturing co., ltd