Absolute Rated Polypropylene Pleated Filter

Ap is made of 100% pure p. P. Depth matrix that offers absolute retention efficiencies from 0.8 to 50 micron with effective filtration area of more than 0.64m2.(note:0.1 to 0.6 micron are available upon request. )Ap offers superior flow rates with low pressure drop and high contaminant holding capacities which is suitable for use in pharmaceutical, micro-electronic, food and beverages and various types of industry applications.100% pure p. P. Ensures wide range of chemical compatibility and suitable for filtration of wide range of solvents and liquids.Continuous r& d resulted ap with multi graded fiber that yields progressive finer particles retention through the depth and life of media.Multi graded density depth filtration mechanism combined with optimized pleated configuration and high effective surface area provides high flow rates capacity, lower pressure drop and superior dirt holding capacity compare with spun-bonded type products.Features and benefits- superior particles retention capacity.- high flow rates and superior throughputs for more filter value.- all parts and supporting layer are thermally welded without any binder to ensure low amount of extractable.- melt-blown p. P. Media protects against fiber shredding and particles unloading.- all materials are 100% pure fda approved silicone-free non foaming polypropylene for contact with food and beverages.- wide range of end configurations to fit any standard housing.- manufactured in clean room environment(class 10k).- a guaranteed high quality product(iso 9001 certified).Technical specifications- micron rating: Absolute rating for 0.8,1,3,5,10,20& 50 micron.(note:0.1,0.2,0.45& 0.6 micron are available upon request).- media material: Finest multi-layer micro-denier p. P. Fibers.- supporting material: Polypropylene micro-denier fibers.- core& cage material: High strength pure p. P. Reinforced pp by glass, high density polyethylene.- end cap: High strength pure p. P. Reinforced pp by glass, high density p. E.- sealing technology: Thermal bonding- o-ring and gaskets: Epdm, silicone, viton, teflon encapsulated type.- filtration area: >0.64m2/10- length:5 to 40 or 125 to 1016mm- id/od:28 mm/68mm(note: Od:115 mm(4-1/2 ) x id:28mm can be produced upon request).Operating conditions- max. Operating temp. :90 degree c at 2.1 bar(30 psi)- max. Forward diff. Press.:4.1 bar(60 psi) at 25 degree c- max. Reverse diff. Press.:4.1 bar(60 psi) at 25 degree c- sterilization:10 times cycles,30 minutes at 90 degree c by hot water. Peracetic acid, chlorinated alkalineProducts, bleach, so2 and hydrogen peroxide at typical sanitizing temperature and concentration. Alternatively,10 times,20 minutes cycles at 121 degree c by autoclave,10 times,60 minutes cycles at 121 degree c at 0.14 bar(2 psid) maximum differential pressure by steam.