AP-1801 Oil Containment Boom

Q)           Knots:                                        4 knots

P)            Buoyancy:                                4.5 to 1

O)           Storage:                                    35 cu/ft per 30 meter section

N)           Heave Response:                     Good

M)          Roll Stiffness:                          Good

L)          Weight:                                   5.6 lbs per meter

K)         TENSILE STRENGTH:        21,000 LBS.

I)           VERTICAL SEALS:            Shall be done using a RF weld method, and will have a                                                                          seal of no less than 1 wide.

                                                            Continues seal of no less than 1 in width.

H)          HORIZONTAL SEAMS:    Shall be welded using the Hot Air method,     and will have a

G)          SECTION LENGTH:          30 METERS

                                                Aluminum, with stainless steel toggle pins. All Trim Stainless Steel.

F)          CONNECTORS:      ASTM Universal Slide Type Connectors, 6061-T6 Marine Grade

E)          BOTTOM TENSION:         5/16 galvanized chain ballast/bottom tension, attached and                                                       finished to connector via a 5/16 screw pin shackle.

D)          STIFFENER:            Aluminum stays between each flotation

C)          FABRIC:                 26 oz Urethane Orange

B)          DRAFT:                   12

A)          FLOTATION:          6 H x 2W Polyethylene Solid Foam (6. L)

Specifications:

AP- 1801 Fence Boom