"
Special specification can be designed based on client's needs.
The nominal length of each roll is 10 meters and the nominal width is one meter
Slated rolls are available in 4kg, 4.5kg and 5kg per square meter
Mineral slated Red (RD)
Mineral slated White (WT)
Mineral Slated Green (GRN)
Mineral Slated Grey (GY)
Mineral Granule Blue (MBL)
Mineral Granule Green (MGRN)
Mineral Granule Grey (MG)
Fine Sand (S)
Polyethylene Film (PE)
Bottom surface finish is normally Polyethylene Film (PE). Upper surface finish choices include:
3kg/m' and 4kg/m'.
Standard thickness available includes 3mm and 4mm. Some types could be available by weight
Product Range
(Unprotected) for Non-accessible roofs or roofs subject to low traffic conditions
The Class15 with Mineral Slated Finish is recommended for exposed roofing system
-Waterproofing of toilets, wet area inside buildings
-Foundations and underground structures subject to movements
-Single layer roofing system subject to low temperature
The Class15 can be applied in
and low temperature performance is required,
where torch applied modified bitumen membranes subject to high mechanical stresses are specified,
The Class15 is a high performance membrane, can be applied virtually anywhere
Uses
with glass fiber filaments which provides highly mechanical properties and dimensional stability
The Class15 is reinforced with composite polyester (P) of non-woven polyester armoured
The Class15 is modified by SBS, thus guaranteeing high flexibility under very low temperature
The Class15 is a line of polymer-modified bitumen waterproofing membrane of the highest quality.
REINFORCED WITH COMPOSITE POLYESTER
"The Class15 SBS MODIFIED BITUMEN ELASTOMERIC WATERPROOFING MEMBRANE
The Class15 SBS MODIFIED BITUMEN ELASTOMERIC WATERPROOFING MEMBRANE REINFORCED WITH COMPOSITE POLYESTER
Fuction: | waterproofing |
Type: | SBS MODIFIED |
Place of Origin: | Egypt |
SBS (styrene-butadiene-styrene) modified bituminous membrane is made by saturating the base(polyester felt, glass fiber felt, glass fiber reinforced polyester felt) in SBS modified bitumen, finishing the upper surface with sands, mineral granules or PE film, aluminum film. 1. ...
Come From Hengshui Ming crown rubber and plastic products co., LTD
Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moisturepr of. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon ...
Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moisturepr of. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon ...
SBS/APP modified bitumen membrane is a kind of flexible sheet waterproof which uses Styrene Butadiene Styrene/SBS thermoplastic rubber OR amorphous polypropylene (APP) as a dipping and covering modifier,whose upper surface is coated by PE film, fine sand, mineralgrain or ...
Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moisturepr of. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon ...
Product Introduction The SBS modified bitumen asphalt waterproof membrane is a kind of macro-molecule material produced by advanced equipment and technology, using high-quality bitumen as its main component, SBS modified asphalt as the modifier, superior materials as its ...
Come From China National Petroleum Waterproof (Shenzhen)Co.,Ltd
Grade:CLASS-A Place of Origin:Egypt Our APP modified bituminous membrane is a torch-applied membrane that is reinforced with either fiberglass, polyester ...
Come From EGYPT AFRICA FOR IMP EXP SAE
Grade:CLASS-B Fuction:waterproofing Type:polymer-modified Place of Origin:Egypt bitumen membranes APP CLASS-B is a line of polymer-modified bitumen waterproofing membrane of the highest quality. ...
Come From EGYPT AFRICA FOR IMP EXP SAE
REINFORCED:NON WOVEN POLYESTER Grade:CLASS-B Fuction:waterproofing Type:APP MODIFIED Place of Origin:Egypt APP MODIFIED BITUMEN PLASTOMERIC WATERPROOFING MEMBRANE REINFORCED WITH SPUNBOND NON WOVEN POLYESTER ...
Come From EGYPT AFRICA FOR IMP EXP SAE
Fuction:waterproofing Type:polymer-modified Place of Origin:Egypt SBS Class 10 polymer-modified bitumen waterproofing membrane of the highest quality. ...
Come From EGYPT AFRICA FOR IMP EXP SAE