Heat Pipe Solar Collector

Heat Pipe Solar Collector Features:
1) Materials:
a) Manifold material: Aluminum alloy, 2.00mm; Color-coated steel 1.00mm
b) Insulation: Rock wool
c) Core inside: Copper (T2); Thickness: 1.50mm
d) Stand part: Aluminum alloy
e) Diameter of the core: 35mm
f) Cover material: Nylon
g) Diameter of Interface: 22mm
h) Heat pipe vacuum tube: Best quality
2) Optimal installation angle:
a) Vertical: 30 - 70 degrees
b) Horizontal: 0 degrees
3) Maximum operating pressure: 0.6 - 0.8MPa
4) Optimal flow rate: 0.1L/min/tube - 0.026GL/min/tube
5) Reliable, efficient, evacuated tubes
6) Copper heat pipes for rapid heat transfer
7) Easy plug-in installation
8) Maintenance free
9) Suitable for mains pressure water (working pressure: 0.6MPa)
10) Provides stable solar conversion throughout the day

Working theory:
Solar radiation is absorbed by the solar tubes and converted into heat. Heat
pipes then conduct the heat from within the solar tube up to the header pipe.

Water is circulated through the heater, via intermittent pump cycling. Each time
when water circulates through the heater the temperature is raised by 5 to
10

Heat Pipe Solar Collector could be used for hot water supply and room heating