GRINDING OIL

Instruction        :  For machining operations of copper and its alloys corrosion properties sould be tested before general use MOLY GRINDING OIL may be stored in temperature range from -15?C/5?F to 60?C/140?F for a time of 12 months.

The product is to be used undiluted

Application        :  MOLY GRINDING OIL H is a special oil used for groove and tool grinding operations of hardened and unhardened tool steels at independent and central systems. The oil shows excellenlent filterability in precoated filter systems and suitable air release property by slight frothing quality even at circulating temperatures up to 35?C/95?F.

                              Content of chlorine            :  0

                              Content of phosphorous   :  min 0,04 %

                              Content of sulfur               :  min 0,03 %

                              Cloud point                        :  < -20?C /< -2?F

                              TAN                                   :  115 mgKOH/g (typical)

                              Flash point  C.O.C            :  130?C/266?F

                              Viscosity at 40?C/104?F    :  4.90 mm²/s /42.67 SUS

                              Viscosity at 20?C/68?F      :  8.40 mm²/s /54.07 SUS

                              Density   at 15?C/59?F      :  840 Kg/m³

                              Colour ASTM                     :  max.0.5, clear yellow

Technical Data :

Description       :  MOLY GRINDING OIL  is the latest version of our grinding oil with an improved formula based on years of experience. This product is manufactured with paraffinic base, highly refined mineral oil of low aromatic content. The anti-oxidation property of MOLY is high and blended with precisely selected active chemicals to enhance cooling, lubricity and anti-rust effect. Contains phosphorus extreme pressure additives, synthetic esters, antioxidants and anti-rust agents.

MOLY Grinding Oil

Our grinding oil is a special preparation of paraffinic-based oil used for groove and tool grinding of hardened tool steels