CONOFLOW ELECTROPNEUMATIC TRANSDUCERS

Conoflows Electro-pneumatic Transducers accept a variety of electrical input
signals and convert them to proportional output signals of 3-15, 3-27 or 6-30 PSIG
(21-103, 21-186 or 41-207 kPa).
The GT_8 Series Transducers incorporate low impedance circuitry and a range
selector jumper switch which can be positioned to accept 4-20 or 10-50 mA DC
current inputs. The selector feature permits stocking only one unit that can be
used in various locations throughout the plant. For easy field adjustment these
units are equipped with an external zero setting and a built-in potentiometer on
the circuit board for span adjustment. Optional input signal of 0-20 mA is available
on the GT_8 Series.
These transducers are available in either high or low capacity configurations (Maximum
Air Delivery Rate). The high capacity models incorporate a booster relay
which eliminates the need for additional boosters or relays when operating air
actuated valves. The low capacity versions use a fixed orifice and are utilized for
DIMENSIONAL DATA - ADVERTISING DRAWINGS:
GT Series - High Capacity: A28-7
GT Series - Low Capacity: A28-9
GT Series - 2 Pipe Mounting Bracket
input signals to pneumatic positioners. NEMA 3R housing requirements are
optional.
The GT_8 Series Transducer, when purchased with an EMI-RFI Adaptor (6386522),
conforms to SAMA PMC-33.1-1978 for Classes 1 and 2, Bands A, B and C with
less than 0.25% error.
The GT_8 Series Transducers are approved intrinsically safe by Factory Mutual,
Canadian Standard Association, and CENELEC. For explosionproof models, refer
to Pages 114-

  • Country:United States
  • telephone:1-843-563-9281
Conoflows Electro-pneumatic Transducers accept a variety of electrical input
signals
*Your name:
*Your Email:
*To:Conoflow
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

T500 Electropneumatic Transducer (I/P, E/P)

The ControlAir Type-500X converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost. The ...

Come From ControlAir, Inc.

CONOFLOW PRESSURE TO CURRENT TRANSDUCER

Conoflows Model GPT82 Pressure to Current Transducer simplifies the monitoring of control loop systems by converting a pneumatic signal to a proportional current output. The compact, lightweight design affords easy line mounting installation into a 2-wire instrument loop. An ...

Come From Conoflow

CONOFLOW ELECTROPNEUMATIC TRANSDUCERS

The Conoflow GT_2 Series Transducer accepts a DC voltage input and provides a proportional 3-15, 3-17 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa) output. The input range is adjustable from a minimum of 0-5 VDC to a maximum of 0-60 VDC. Note that there are two circuit boards ...

Come From Conoflow