Outdoor, Cyclo-Aliphatic Resin Cast Current / Voltage Transformers
Product Details
The main insulation is non-aging epoxy Resin which is a proven insulating material since last several years.
The Voltage transformer is encapsulated in the resin in a single process which is done under controlled temperature and vacuum.
The transformer is very compact
It requires practically no maintenance.
Primary winding is done in trapezoidal fashion with continuous reduction of turns ( in the order of start layer to end layer) to ensure mechanical stability and also high strength against impulse
voltages.
High quality Kraft paper or poly propylene film is used as inter-layer insulation and is judiciously applied to obtain optimum performance. In case of kraft paper insulation, the coil is dried, and
impregnated with low viscosity resin under vacuum prior to the final encapsulation.
All metal parts are painted in-house. The painting scheme is shot blasting, zinc spraying, followed by two coats of epoxy based zinc rich primer with a top coat of polyurethane paint of desired
shade.
All exposed hardware is of stainless steel.
Transformer is designed and processed to obtain partial discharge free performance.
VTs can be designed to international standards IEC, BS, ANSI(IEEE) etc.
Products are designed for partial discharge free performance even at elevated voltages
| Outdoor, Cyclo-Aliphatic Resin Cast Current / Voltage Transformers |
|
|
CompactNo maintenanceNo risk of fire/explosionEasy to handleLow transportation cost Outdoor Cyclo-aliphatic Resin Cast Current Transformers up to 36 kV
The main insulation is non-aging epoxy Resin which is a proven insulating material since last several years. |
- Country:India
- telephone:91-91 253 2383710
| CompactNo maintenanceNo risk of fire/explosionEasy to handleLow transportation cost |
You may also like
Send inquiry / quota request to Outdoor, Cyclo-Aliphatic Resin Cast Current / Voltage Transformers
Relate products of Outdoor, Cyclo-Aliphatic Resin Cast Current / Voltage Transformers
Resin Cast current Transformers are dry type transformers the active part of which is completely embedded in quartz loaded epoxy resin by using Vacuum moulding technique. After moulding the resin is hardened by polymerisation. The main insulation between primary and secondary ...
Come From INTRANS ELECTRO COMPONENTS PVT. LTD
Outdoor, OIP Insulated Current / Voltage Transformers Quick Links Outdoor, OIP Insulated Current Transformers Outdoor, OIP Insulated Voltage Transformers Outdoor, Cyclo-aliphatic Resin Cast Current Transformers Outdoor Cyclo-aliphatic Resin Cast Voltage Transformers Indoor , ...
Come From Gemini Instra Tech Private Limited
Individuality the basis for innovation and creativity. The exclusive decors of art concept help interior architects to open up new ways in the design of furniture. ...
Come From INTRANS ELECTRO COMPONENTS PVT. LTD
you can choose any colour: red or black and so ... Brand Name:sanai Place of Origin:Zhejiang China (Mainland) 01.this type is an all work-condition bus type current transformer with expoxy casting 02.whole sealing insulation ...
Come From Zhejiang Sanai Transformer Co., Ltd.
loaded epoxy resin by using Vacuum moulding technique. After moulding the resin is hardened by polymerisation. The main insulation between primary and secondary and earth is obtained by this epoxy resin and hence CTs have a lot of technical advantages. ...
Come From INTRANS ELECTRO COMPONENTS PVT. LTD
Indoor, Epoxy Resin Cast Current / Voltage Transformers Quick Links Outdoor, OIP Insulated Current Transformers Outdoor, OIP Insulated Voltage Transformers Outdoor, Cyclo-aliphatic Resin Cast Current Transformers Outdoor Cyclo-aliphatic Resin Cast Voltage Transformers Indoor , ...
Come From Gemini Instra Tech Private Limited
THE RESIN CAST CTs ARE SIMILAR TO OTHER NORMAL CTs. THE ONLY DIFFERENCE IS ITS MOULDING. INSTEAD OF TAPE WOUND, THESE TYPE OF CTs ARE MOULDED WITH EPOSY RESIN TO WITHSTAND IN HIGH TEMPERATURE AREAS. THIS TYPE OF CTs ARE NORMALLY USED FOR LOCATING NEAR HIGH TEMPERATURE AREAS ...
Come From RR ELECTRO TECH
The core is built up from non-ageing cold rolled grain oriented silicon steel laminations, coated with heat resistant insulation. Laminations are annealed to reduce losses. Current transformer core is made from continuous lamination wound as a toroid. CONSTRUCTION Current and ...
Come From skipper
Model Number:JDZX(F)9-35Q This series voltage transformer applies epoxy resin casting.support type entire closed structure,used for indoor power system. ...
Come From Shanghai High-Power Electrical Co., Ltd.
