50 - 275 kVA GENERATOR SETS

50-275 kVA DIESEGENERATOR SETS Design Features
ENGINE
Heavy duty dieseengine.
Four stroke, water cooled, turbocharged
Direct injection fuesystem.
12/24 V D.C. starter and charge alternator.
Replaceable fuefilter, oifilter and dry element air filter.
Cooling radiator and fan.
Starter battery (with lead acid) including Rack and Cables
Flexible fueconnection hoses and manuaoisump drain valve.
Indutriacapacity exhaust silencer and steebellows.
Fuestop solenoid
Fuepump
Jacket water heater (at automatic models).
Operation manuals and circuit diagram documents.
ALTERNATOR
Brushless, single bearing system, flexile disc, 4 poles.
Insulation class H
Temperature class H
Standard degree of protection IP21
Self-exciting and self-regulating.
Impregnation with tropiclised epoxy varnish.
Solid stade Automatic Voltage Regulator.
CHASSIS
The complete generator set is mounted as whole on a heavy-duty fabricated,
steebase frame.
Antivibration pads are fixed between the engine/alternator feet and the base frame.
Base frame design incorporates an integrafuetank.
The generating set can be liefted or carefully pushed/pulled by the base frame.
Diatype fuegauge and drain plug on the fuetank.
Forklift pockets within base frame (up to 500kVA).
CANOPY
Alcanopy parts are designed with modular principles.
Without welding assembly.
Doors on each side.
Almetacanopy parts are painted by electrostatic polyester powder paint.
Exhaust selincer is protected against environment influences.
Thermally insulated engine exhaust system.
Emergency stop push button is installed outside of canopy.
Easy lifting and moving.
Easy maintenance and operation.
CONTROSYSTEM
Control, supervision and protection paneis mounted on the genset base frame.
The contropaneis equipped as follows:
1. Auto, Mains Failure ControPanel:
Paneeuipment:
Controwith AMF module
Static battery charger
Emergency stop push button
a) Generating set contromodule features:
The module is used to monitor a mains supply and automatically start a
standby generating set.
Micro-processor based design
Automatic controof mains and generator contactors
Monitors engine performance and AC power output
LED alarm indication
Front paneconfiguration of timers and alarm trip points
Easy push button control
STOP/RESET - MANUA- AUTO - TEST - START
b) Metering via LED display:
Generator Volts (L-/ L-N)
Generator Ampere (L1,L2,L3)
Generator Frequency (Hz)
Engine hours run
Engine oipressure (PSI-Bar)
Engine temperature ( C)
Plant battery volts
Mains Volts (Ph-Ph/Ph-N)
c) Alarms:
Over and Under Speed -
Start and Stop Failure -
Over Current -
Under / Over Generator Voltage
Low and High Battery Volt
Charge fall
Low OiPressure
Emergency stop
High engine temperature
c) LED Indications:
Mains available
Generator available
Mains on load
Generator on load"

try kva generator    to get through more products