Sandwich Panel

    In addition to its fast, easy installation, resistance lightness,elegance in colour variety, sound insulator, heat cold, very reasonable price even cheaper than other traditional coverings, the single covering panel will be on the market.

The advantages of the (single covering) Panel

National Duty :
 
   An alternative for ceiling, traditional and harmful Coverings.
Easy Makers Company, in fulfilling is national duty in safeguarding the health of the society and observing the rules and regulations of the environment, has ressored to a special designing and production (of a single covering panel) for the performance of the ceiling and wall operation especially for the industrial foof, protein (animals), and clothing units.

   Easy makers company is the only producer of the Sandwich panel with the fire retard foam wich has suitable fire resistance against the expansion of fire and will extinguish the the flame due to the special chemical reactions that it causes in the foam.

8 - Delay in Catching Fire By Using Fire Retared Foam :

Compressive strength is strongly influenced by the density of the foam.

  The most important mechanical properties are compressive and flexural strenght.For compression, the foam is compressed between two parallel plates.The force P is measured at percentage of deflection (max 10).

7 - Mechanical Propertes :

   Excellent Thermal Insulator having less thickness is suitable for use in cold stores,warehouses and portable camping houses specially with Aluminium or colored steel sheet coverings which are resistant to serve and harsh atmospheric conditions and tropical corrosive weather system.

6 - Excellent Termal Insulator :

  A sound attenuation of about 30 db can be obtained with a 10 cm thick PU Panel, wich is 4 times more than concerts, 8 times more than brick walls.If higher degrees of attenuation is required.Dual walls system can be used.

5 - Sound Attenuation Insulator :

  One of the other products is panel wrapped in paper in 4,6,10,15 and 20 cm thickness suitable for use as heat insulator under concrete fishing or the industrial and residential building roofs, or the floors in cold storage system.

4 - Two Side Paper Covered Panel :

  With use of one side metal and other side nylon or paper covering, Pu panel is an ideal material for suspended ceiling and roof cover of industrial buildings and warehouses.Another usage of this panel is to cover old or brick walsfor new outward sight and cold and sound insulation.

3 - One Side Metal Sheet Panel :

  Steel sheet coils with 0.5mm thick is deep galvanized by 275 gr/m2 of zinc coating on both sides with an average thichness of  0.7mm thick is unpanted or painted alloy 3105.3 coat of panete coats with the thickness of 20 micron.

2 - Specification of covering steel sheet of Panels :

  Sandwich panels are produced in 2,3,4,5,6,8,10,12 and 15 cm thickness with 103 cm width with variable length according to order.The covering sheet material could be of plain and colorful aluminium, foil aluminium or craft sheet.The inside foam of the sandwich panel is also of polyurethane kind and with the specific weight equal to 40 kg/m3.The rigid polyurethane foam itself is resistant to the solvent, plasticizers, fuels, mineral oils, dilute acids and alkails, exhaust fumes and aggressive industrial atmosphers encoudered in practical service.Itself resistance  to fungi and microbes makes rigid polyurethane foam rot and decay advantage yet absence of any health  hazard or odoure makes Pu panel the best insultor for uses in cold storage system.

 Technical Specification of the Panel :