1260 BLANKET

1260 BLANKET resists attack from most corrosive agents, except Hydrofluoric and Phosphoric acids and concentrated alkalies.
It resists oxidation and reduction and if it is wetted by water, steam or oil, its thermal and physical properties are restored on drying.
It resists oxidation and reduction and if it is wetted by water, steam or oil, its thermal and physical properties are restored on drying.
1260 BLANKET is available in thicknesses of 6mm to 50mm in three nominal densities of 64kg/m3, 96kg/m3 and 128kg/m3. It is supplied standard in rolls, but can also be supplied as strip or as cut shapes. It can be supplied with Aluminium or Stainless Steel foil adhered to its surface, or with an adhesive film attached.

Way to packing: Cardboard Cases
Physical: Properties
Colour: White
Class Temp: 1260
Melting Point: 1790

CHEMICAL ANALYSIS
Shrinkage after 24hour soak at:
1000: 1.60%
2000: 3.00%
Specific Gravity 2.73/g/cm

STANDARD ROLL SIZES
AL2O3: 48.00%
SiO2: 51.80%
Fe203: 0.04%
Mg0/Ca0/Tio2/Na20: Trace