1. Ocean PENETRATOR COBALT Twist Drill Bits - Taper Shank

Call Ocean Machinery at 1-800 286 3624 today to order your drill bits for your Ocean Avenger or other CNC Beam Drill Line.

Pricing - 13/16" costs $165.00

Direct access to sophisticated technical support. Ocean Machinery provides you with direct access to the manufacturers' tech support hot-line.

No grinding required on the exit of the hole with properly sharpened drills - dramatically reduces costs

It requires only a single-stage drill grinding procedure and saves resharpening time.

Chipbreaker point - eliminates long stringy chips that clog swarf bins and fly all over the shop.

Faster Drilling feed rates - The Ocean Penetrator works best at 7.1 in/min of feed rate - almost 20% faster than regular twist drill bits. This results in faster drilling times. .

Should yield 50,000 holes per drill bit - .

More than 500 holes between sharpenings (see video)

It requires only a single-stage drill grinding procedure. This simplifies the resharpening and saves resharpening time

Pre-sharpened to 175 degrees with raised tip - this is the ideal recommended tip for structural steel. No need for pre-sharpening.

Cobalt Steel - longer life - in our recent testing we were able to drill well over 500 holes before resharpening was required. Dramatically reduces costs.

They feature:

We stock 7/16" thru 2" diameter drills, and extended length drills are available 9/16" thru 1-1/16"

The Ocean PENETRATOR Drill Bits arrive from the factory pre-sharpened to 175 degrees with a split point.

Click here to see the .

We tested this drill bit in early August 2006 and drilled 490 holes in 1 hour. We also drilled more than 500 holes and the drill was still drilling holes at less than 8 seconds per hole.

try ocean parcel post    to get through more products