BASAK TRACTOR
Product Details
| ENGINE | |
| Type | BASAK DW 308,46 with direct injection, diesel |
| Power | 46 HP, 34.5 KW (DIN) |
| Max. Revolution | 2400 rpm |
| Max. Torque | 16 kpm, 1500 rpm |
| Cylinder Quantity | 3 |
| Cylinder Diamer and Stroke (mm) | 100 / 100 |
| Total Cylinder Volume | 2355 cm3 |
| Piston Speed | 8 meter / second |
| Cooling System | Water coolted; Thermtatic controled |
| Battery | 120 Ah (2 pieces * 60 Ah) |
| Dynamo | 14 Volt 28 Ah, 392 Watt |
| Staretr | 12 Volt 2.4 kW |
| Fuel Pump | Bosch VE; Star type pump |
| Air Filter | Oil bath type with pre air filter |
| Exhaust | Vertical Silincer |
| Fuel Consumption | 168 gr/ HP-hour |
| BRAKE SYSTEM | |
| Service Brake | Mechanically actuated internal shoe brake acting on rear wheels; lubricated disc clutch |
| Parking Brake | Service brake mechanically lockable |
| Servo-Steering Brake | Acting optionally on the right of left rear wheel |
| TRANMISSION and REAR AXLE | |
| Clutch | Duel disc dry clutch for vehicle drive |
| Change Gearbox | BASAK group reversing transmission with preselector range, helically toothed, 4 claw-shiftedbasic gears, 2 forward stages and 1 reverse stage, field-road group |
| Final Speed | 30.05 km/h |
| Number of Gear | 16 forward, 8 reverse with synchromesh axle |
| Rear Axle Design | Center is equiped with spirally toothed crown wheel and bevel pinion differential, in addition to the planetary transmission in the axle tubes. Differential controlled and equipped with locking system. |
| PO-Shaft | 2 stages of 540&1000 rpm, directly actuated from the engine and hand controlled cluych system. |
| PTO-Shaft Output | 30 kW (40 HP) at 540 rpm |
| PTO-Shaft Speed at Rated Engine Speed | Position 540:634 rpm- Position 1000:1127 rpm |
| DRIVING SPEEDS (km/hour) | |
| At an engine speed of 2400 rpm 12.4*36 6 pr |
| CATEGORY | SHIFT | OFF ROAD (L) | ROAD (S) |
| 1st | 1.55 | 5.18 | |
| Forward Normal | 2nd | 2.98 | 9.96 |
| (VN) | 3rd | 4.43 | 14.8 |
| 4th | 7.31 | 24.44 | |
| 1st | 1.9 | 6.38 | |
| Forward Fast | 2nd | 3.67 | 12.25 |
| (VS) | 3rd | 5.45 | 18.2 |
| 4th | 8.99 | 30.08 | |
| 1st | 1.9 | 6.38 | |
| Reverse | 2nd | 3.67 | 12.25 |
| (R) | 3rd | 5.45 | 18.2 |
| 4th | 8.99 | 30.08 |
| VEHICLE DIMENSIONS | |
| Max. Length | 3730 |
| Max. Width | 1800 |
| Max. Heigth (With Exhaust Pipe) | 2630 |
| Wheelbase Track Widths, Front (with std. tyres) | 1360 |
| Wheelbase Track Widths, Rear (with std. tyres) | 1370 |
| VEHICLE WEIGHTS (kg) | |
| Total Weight | 2870 |
| Front Axle Load | 1074 |
| Rear Axle Load | 1796 |
| HYDRAULIC SYSTEM | |
| Manufacturer and Model | BASAK hydraulic control with BOSCH control unit |
| Control | 2-Stage traction control via upper link, position control and floating position |
| Locking | Hydr. linkage locing by throttle valve |
| Linkage | BASAK 2053-SHH standart linkage cat I and II upper link adjustable struts, double-slot lifting arms, drawbar cat, implement bolt, reducer sleeves. |
| Hydraulic Pump | Clutch-independent drive (delivery: 35,1 L/min) working pressure:175 bar Max. Lifting power on drawbar: 25,5 kN/2600 kp Seperate cylinder connection: 1 single acting control unit with hydr. plug-in coupling |
| BODY | |
| Engine bonnet upward swingable, radiator grille and side panel removable, rear wheel mudguards, implement couplink all levers in easy reach, driver's seat tiltable upward, fuel tank with a capacity of 83 litres, rear view mirror with adequate visual range. | |
| 5 ballast weights front (appr. Total weight 190 kg) | |
| 4 ballast weights rear (appr. Total weight 206 kg) | |
| CHASIS | |
| Front Axle Load | Rigit axle with rocking suspension |
| Steering Assembly | Hydraulic steering |
| TYRES | |
| Front Wheels | 6,50*16 6 pr |
| Rear Wheels | 12,4*36 6 pr |
