Strobe function green laser sight and strobe 200 lumen CREE Q5 LED light combo

Note: The XL rail key can be changed to accommodate several varieties of mounting rails. Remove the rail key screw with a 7/64^th hex wrench and pull the rail key from the body. Insert the new rail key and fasten it in place with the rail key screw.

XL PARTS

Note: always avoid aggressive cleaning solutions as they may damage the XL.

The XL rail clamp tensioning bolt requires an application of high quality gun oil to keep it rust free. Use a soft cloth and mild detergent to clean the glass LED lens and keep it free of dirt and grime. The laser aperture (XL-2LL) can be cleaned with a Q-tip 9or similar item) and mild detergent.

MAINTENACE

6.       Swing the door latch over the door and snap it into place.

5.       Firmly push and hold the door closed against the flashlight body.

4.       Hold the battery switch/door at an angle and place the small tab on the bottom of the battery/door switch into the slot in the flashlight body.

3.       Insert the new batteries observing polarity. Note: The flashlight is polarity protected and will not light if the batteries are inserted incorrectly.

2.       Slip the batteries from the flashlight.

1.       Unclip the door latch, the latch is tight, it may help to use a coin.

To access the battery compartment you must first remove the flashlight from the firearm. Follow the XL removal procedure instructions to remove the flashlight from the firearm.

DANGER: DO NOT use anything other than a CR-123 battery or rechargeable batteries with this product.

The ES-XL-2LL laser sights use 2 CR-123 (6V) batteries. The CR-123s negative and positive pole has been indicated on the mount.

BATTERY ASSEMBLY

If mounted to the side, the bullet will also deviate to the side of the laser line, as well as up and down. In practice, a XL-2LL on a handgun can be adjusted to keep the bullet strike within about 2 high and 2 low out to about 100 feet.

Laser adjustment and the muzzle velocity of the bullet determine where this point occurs. The user must decide how high above or below the sight line the bullet can be allowed to strike and adjust the sight accordingly. At distances less than the zero range the bullet will be above the sight line. Beyond the zero range the bullet will be the sight line.

For a laser mounted below or to the side of the bore, there is only one distance where the bullet path will coincide with the laser sight line, this point is the zero range.

LASER SIGHT ZEROING

Adjustable mount flexibility that can accommodate the Glock or Picatinny (1913) accessory rails.

Fits existing light bearing holsters

Machined anodized aluminum housing

Ambidextrous Momentary/Steady on-off Switch

Dust and Shockproof

Safe and adjustable

Compact

Lightweight

Quick target acquisition

FEATURES

Master Carton: Top cardboard carton

Unit package: Gift paper box or white box

Packing: 1 unit/gift box, 50 units/master carton

PACKING

User manual

2 CR-123A lithium batteries

Calibration tools

Laser sight and LED Flashlight integrated group

KIT INCLUDES

Rail Mount: Integrated mount

Operation: Ambidextrous Momentary/Steady on-off Switch

Finish: Anodic oxidation/ V' r3 black

Construction: Aircraft aluminum 7061-T6

Warranty: Extended Warranty

Weight with Battery: 4.72 oz, 133.8g

Working volt: 3V

Life time:

Strobe green laser sight and led light
1. Green laser with 532nm 5mw
2. 200 lumen CREE Q5 led light
3. Normal or hard anodize