Harezmic Series Intelligent Addressable Monitor And Controller Modules Alarm

not require an external power supply.

has two LED indicators: Polling and Relay Active. The module does

normally open or normally closed. The module is loop-powered and

contacts with max. load of 8 A 250 VAC. The relay can operate as

configuration.The module has one relay output with volt-free, unipolar

lifts, dampers etc. on fire and fault event as defined in cause-effect

The module is used for activation of external equipment such as

MG-6700 Mains Relay Controller, 1-Way Output

and MG-5100 series manual call points is recommended.

For best performance, connecting MG-2000 series fire detectors

The MG-6400 series modules require external 24 VDC power supply.

indicators: Polling and 24 V Fault.

inputs, each having a separate address. The modules have two

The MG-6400 model has one input. The MG-6408 model has 8

modules are continuously monitored for open and short circuits.

and unlimited number of manual call points. Zone circuits of the

with conventional zones, each capable of hosting up to 20 detectors

The modules are used for expanding the fire alarm control system

MG-6408 Zone Monitor, 8-Way Input

MG-6400 Zone Monitor, 1-Way Input

Strobes or 20 MG-5400 Fire Alarm Bells.

Each output can host 16 MG-5000 Sounders, 8 MG-5200 Sounder

The MG-6300 series modules require external 24V DC power supply.

Active, and 24 V Fault.

separate address. The modules have three indicators: Polling, Sounder

one output. The MG-6308 model has 8 outputs, each having a

monitored for open and short circuits. The MG-6300 model has

in cause-effect configuration. Sounder circuit is continuously

fire alarm bells and other audio-visual warning devices as defined

The modules are used for activation of sounders, sounder strobes,

MG-6308 Sounder Controller, 8-Way Output

MG-6300 Sounder Controller, 1-Way Output

powered and have one indicator: Polling.

inputs, each having a separate address. The modules are loop-

open and normally closed contacts. The MG-6208 model has 8

model has one volt free input, which can monitor both normally

devices, control contacts and other security outputs. The MG-6200

sprinkler system, alarm inputs, general purpose fire prevention

The modules are used for monitoring of external devices such as

MG-6208 Switch Monitor, 8-Way Input

MG-6200 Switch Monitor, 1-Way Input

and Relay Active.

The modules are loop-powered and have two indicators: Polling

MG-6108 model has 8 outputs, each having a separate address.

free changeover normally open and normally closed contacts. The

configuration. The MG-6100 model has one relay output with volt

lifts, dampers etc. on fire or fault event as defined in cause-effect

The modules are used for activation of external equipment such as

MG-6108 Relay Controller, 8-Way Output

MG-6100 Relay Controller, 1-Way Output

- 8-way input and output module models

- Power supply fault monitoring by volt-free changeover contact

- Loop-powered Switch Monitors and Relay Controllers

- LED-indicated activation and fault conditions

- Easily programmable by Loop Manager

-"Soft" addressable by use of Address Programmer

- Microprocessor-controlled

Features

CONTROLLER MODULES

HAREZMIC SERIES INTELLIGENT ADDRESSABLE MONITOR AND

VIP (Very Intelligent Protocol) compatible.
SSPB (Russia) certified. Approved by
Kazakhstan, Oman, and Bahrain Civil
Defense