Ionic Facial Steamer,beauty steamer,beauty salon Equipment

After carrying the above procedures, if the machine can not work, stop using it and have it inspected, so as to avoid accident.

5.      When using it again, confirm the ionization of steam first..

4.      Make the water tank and machine dry, then replace the water collector.

3.      Put out the water of the water tank and water collector.

2.      Let it cool down for more than 10 minutes.

1.      Turn off the power supply switch, break off the electricity, confirming this by the power indicator light.

The water drops would build up along the path of steam in the machine after the machine is used repeatedly, which will prevent the ionization of steam, carry out the following procedures in this case:

IV. Cautions for ionization of steam:

4. Dry the machine with cotton cloth. Dont clean it with thinner and petrol, or the body will be discolored, oxidized or cracked.

3. Direct water washing(bath or flush) is forbidden

2. .After cutting off the power supply, let it cool down for 15 minutes.

. Dont heat the machine without water, or it will produce the dirt affecting the spurting out of steam.

1. Turn off the ion switch and power switch, remove the power plug.

d).After use:

Tips:After using the machine, let it cool down, then add water.

. Use the steam after putting the beauty liquor.

. After putting  massage cream on the face, use the ionic steamer while massaging.

2. Wash the face.

1.Apply ionic steam for about three minutes.

Operation before cleaning:

Addition: The machine can also be used before making up.

3.The time of steaming face:5 minutes each time,35 times every week,then clean the face with cold water, it will be better if you use it with skin tensioning liquor.`

2.The distance between your face and the nozzle: Usual distance is 2035cm, 2025cm is for oil skin, 3035cm is for dry skin, 2530cm is for neutral or mix skin, 35cm is for sensitive skin.

1.The machine is usually used when removing makeup.

c).How to contact the steam:

4.  We can adjust the direction of steam by the nozzle without touching the heat steam.

3.   Press the ion switch. The ion will produce with the sound of ionization .

. Its normal that the steam come out with water drops firstly.

2.                The steam will be out within 30 seconds, which is common steam for steaming the face.

1.                Connect the power supply and turn on the power switch to start heating(the power indicator light will be on)

b) Ways of usage

3. Replace the screwed cover of water tank and top cover tightly. Make sure that the cover will be tight(the convex indicator of the screwed cover aligned with the close arrow),or the steam leaked from the water collector may lead to injury or deformed body

n        Add the water avoiding the tubular of the center.

n        The water must not be higher than the tubular in the tank.

Never use any water other than pure water and distilled water.

2.      Put the pure water and distilled water with the cup.

1.      Install the water collector to the machine body.

a)    Preparation before usage

II.               How to Use:

4.     Light spots, kill skin bacteria and reduce the wrinkles

3.      Promote blood circulation and regulate the pH value of skin

2.      Make our skin absorb enough nutrition and water.

1.      Soften the cuticle and improve the absorbency of skin to make the skin beautiful.

II.The function of beauty skin

I.                  The instruction of beauty skin

The Usage Manual

Ionic Facial Steamer

30 seconds

Waiting time for steam

40

Ionic Facial Steamer,beauty steamer,beauty salon Equipment
Dimensions:26*16.3*20CM
Power:50/60Hz/280W
G.W.:14.52KG

try beauty salon equipment    facial steamer    salon equipment    to get through more products