Screw Extruders

E 73 Extruder 73 mm Entek extrusion lineDownload throughput rate sheet E-MAX" twin-screw extruders are designed for maximum flexibility. Taking full advantage of co-rotating technology, ENTEKs screw geometry, metallurgy and manufacturing discipline allow for industry leading material mixing and productivity in multiple areas of processing. The base design, control modularity, multiple L/D choices, high torque/high speed motor and gearbox combinations, and material feed options can be modified to meet or exceed your requirements.[ print ]Extruder Specification SCREWS Diameter 73 mm Rotation Co-Rotating Length 28-52 L/D Screw Center Distance (mm) 59.5 Screw Do/Di Ratio 1.59 Flight Depth (mm) 13.5 Free Area, 2-Flight (cm2) 31.0 Shafts 24 Tooth Involute Spline BARRELS Form Square, Flanged Length 292 mm Cooling Internal Liquid Cooling Open Barrel Heat Zone 5.5 kW Aluminum7.3 kW Bronze/Cast Iron Closed Barrel Heat Zone 6.6 kW Aluminum10.2 kW Bronze/Cast Iron DRIVE SYSTEM Std. Gearbox Ratios 1.46 / 2.90 / 5.8 Screw Speeds 1200 / 600 / 300 rpm Motor @ 1750 rpm 800 / 400 / 200 hp Motor Equivalent in Watts 597 / 298 / 149 kW Voltage Options 380 / 415 / 460 / 575 Volt Standard Motor Controller AC CONTROLS Controller Ethernet PLC with Color Computer Interface Heat/Cool Zones Up to 16 Standard (additional upon request) SIZE & UTILITIES Installed Cooling Capacity (gearbox and barrel) 59 tons (746,820 kj) [215 kW] @ 400 hp and 600 rpm Typical Cooling 13.3 tons (168,350 kj) Est. Power Requirements* 601A Power, Minimum Breaker 800 Amps Centerline Height 1120 mm [44 in] Length, 48D 7110 mm [280 in] Width 1205 mm [47.5 in] Height (top of motor) 1480 mm [58 in] Weight (approx.) 8160 kg [18000 lb] * - Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up

E 73 Extruder

  • Country:India
  • telephone:91-704 662 9574
E 73 Extruder
*Your name:
*Your Email:
*To:ENTEK Manufacturing, Inc
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Twin-screw Feed Extruder

What is a Twin-screw Feed Extruder? The H series twin-screw feed extruder is primarily used for the production and processing of various floating, sinking, and slow-sinking aquatic feeds. It can meet various customer demands, including 0.6mm aperture floating and 0.8mm aperture ...

Come From Henan Herm Machinery Co., Ltd.

DGP Fish Feed Extruder Machine

Feed Pellet Mill Introduction DGP dry-type fish feed extruder is used to process various kinds of grains into high-grade aquatic feed pellets for fish, crabs, catfish, shrimps, etc. This dry-type fish feed pellet extruder mill has gained popularity among fish farmers. This ...

Come From Henan Herm Machinery Co., Ltd.

DSP Fish Feed Extruder Machine

DSP Fish Feed Extruder Machine Introduction DSP wet-type floating fish feed machine is mainly used to produce all kinds of floating or sinking aqua feed for fish, shrimp, eel, bullfrog, etc. It can also be adapted to produce feed pellets for a pet, such as a dog, cat, and so ...

Come From Henan Herm Machinery Co., Ltd.

Water-Lubricated Oil-Free Screw Air Compressor

A water-lubricated oil free screw air compressor is a machine that exclusively utilizes water, eliminating the need for any lubricating oil. This design prevents environmental pollution and emissions. The compressed air within the stainless steel cylinder body is cleansed by ...

Come From Auliss Henan Intelligent Technology Co., ltd.

Two-Stage Screw Air Compressor

By employing two-stage compression, an intermediate cooler can be introduced between the stages. This allows the compressed gas, after the initial compression stage, to undergo isobaric cooling, reducing its temperature before entering the subsequent cylinder. Lower temperature ...

Come From Auliss Henan Intelligent Technology Co., ltd.

Medium-Pressure Screw Air Compressor

The AULISS medium pressure air compressors employs a German linear screw main unit, capable of reaching a maximum pressure of 30 bar. The main unit is designed with a full screw structure, heavy-duty pressure bearings, and a labyrinth seal, ensuring zero leakage under high ...

Come From Auliss Henan Intelligent Technology Co., ltd.

Atmospheric Screw Air Compressor

Combining scientific design and excellent manufacturing technology, the micro-oil injected screw compressor is equipped with an advanced screw airend module, a stable and reliable drive motor, an intelligent and efficient cooling system, and a control module to provide strong ...

Come From Auliss Henan Intelligent Technology Co., ltd.

Screw Vacuum Pump

A rotary screw vacuum pumps is a device that generates, improves and maintains vacuum in a closed space by various methods. A china screw vacuum pump can be defined as a device or device that uses mechanical, physical, chemical or physicochemical methods to extract gas from a ...

Come From Auliss Henan Intelligent Technology Co., ltd.

Micro-Oil Screw Air Compressor

The micro-oil screw compressor has the characteristics of reliable operation, few wearing parts, low vibration, low noise, and high efficiency. The screw oil air compressor working principle is to use the power pump or by virtue of the pressure difference generated by itself. ...

Come From Auliss Henan Intelligent Technology Co., ltd.

Portable Screw Air Compressor

AULISS Portable Screw Air Compressor is one of the most advanced models both domestically and internationally, making it an ideal choice for users in China. The portable rotary screw air compressor utilizes an internationally advanced rotor profile, resulting in an ideal force ...

Come From Auliss Henan Intelligent Technology Co., ltd.