Motorized Valve
Product Details
More Product Features
V2 Series Motorized Valves are made up of Actuator and brass Valve Body.The Valve is closed, configurations of valve body are closed off;The thermostat (NTC) transfers a signal to actuator
that will connect to power, and then open valve, input hot water or freezed water to fan coil unit.If the room temperature reaches to set-point, thermostat transfers a signal to actuator to cut off
the power, and spring switch returns, valve is closed,and the hot or freezed water is block to fan coil unit.Therefore, the room temperature could be controlled in the set-point through valve
opened or closed.
Specifications:
* Material
Actuator:Stainless steel plate,Aluminum cover
Valve Body:Forged Brass
Stem:Brass/Stainless steel
Seat:Brass
Paddle:Nitrile-butadiene rubber(NBR)
CHARACTERISTICS
* power:12 /24 /120 /220 /270V/AC
V2 motorized valves are used to control the flow of hot water, cool water in heating, cooling and air-conditioning system
- Brand Name:HDICH
- Model Number:V2
- Place of Origin:Shanghai China (Mainland)
- Standard or Nonstandard:Standard
- Country:Hong Kong
- telephone:86-021-33828411
| Delivery Time: | 25 working days |
| Supply Ability: | 50,000 Piece/Pieces per Month |
| Minimum Order Quantity: | 500 Piece/Pieces |
| Payment Terms: | L/C,T/T |
| Port: | Shanghai |
| Brand Name: | HDICH |
| Model Number: | V2 |
| Place of Origin: | Shanghai China (Mainland) |
| Standard or Nonstandard: | Standard |
You may also like
Send inquiry / quota request to Motorized Valve
Relate products of Motorized Valve
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves ...
Come From GangYe Group Co.,Ltd.
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating ...
Come From GangYe Group Co.,Ltd.
Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class ...
Come From GangYe Group Co.,Ltd.
globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Come From GangYe Group Co.,Ltd.
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? ...
Come From GangYe Group Co.,Ltd.
Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Come From GangYe Group Co.,Ltd.
Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by ...
Come From GangYe Group Co.,Ltd.
Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, ...
Come From GangYe Group Co.,Ltd.
Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are ...
Come From Zhejiang Carbo Bronze Co., LTD
The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is ...
Come From Zhejiang Carbo Bronze Co., LTD
