Valves
Product Details
From40M Up 1500MM
Dimensions:
PN 2.5, 4 , 6, 10, 16, 25, 40 BAR.
Pressure:
EPDM (Tmax / Tmin) =120 C / - 10 C
- sleeve :-rubber: NBR (Tmax / Tmin) = 80 C / - 10 C
- Shaft : min 11.5% Cr stainless steel -410 S21 BS 1506-X20Cr13 DIN 17440-420aisi
- bronze CuAI9T
-Stainless steel 2MoNiCr 175-316 S2 BS 1449-X20CrNImo 18.12 DIN 17440-316 L AISI.
- Ductile iron EN GJS 500-7 SR EN 1563-99- BS 2789 GGG 50 DIN 1693 + rubber.
- Disc: - Ductile iron EN GJS 500-7 SR EN 1563-99- GGG 50 DIN 1693 - On request.
- Ductile iron EN GJS 500-7 SR EN 1563-99- BS 2789, GGG 50 DIN 1693 - On special request.
-Body, bonnet cast iron EN GJL 250 SR EN 1561-99- BS 1452, GG 25 DIN 1691.
Materials:
AP pneumatic operation
AE electric operation
AR manual with gear box
AM manual with lever
Operation:
-energetic (0) without electric switch
-antiex (EX) with electric switch box
-normal (N) with electric switch box
Standard equipped with NOTOR actuator in the following variants:.
Electric actuator:
- rubber / rubber
- stainless steel / rubber
- bronze / rubber
- disc / sleeve: -ductile iron chromium plated on the outline / rubber
Seats:
- 120 C / -10 C for EPDM type rubber
- 80 C / -10 C for NBR type rubber
T max/ T min
Working temperature:
Cls. 125/150-ANSI B16.5.
- Connecting flanges: ISO 7005-2; BS EN 1092-2; ANSI; DIN 2501
- Overall lengths : ISO 5752; BS 2080; ANSI; DIN 3202
5 m/s for PN 16
- max.liquid flow speed : 4 m/s for PN 10
- flanged body STAS 10933 /2.
- two- pieces
- shaft : - one piece
- (F) - flanged
- (L) - lug
- type : - (W) - wafer
Design and dimensional characteristics:
fluids charged with solid particles ( consistency max.3% )
- petroleum products;
- saturated vapours;
- cold and hot industrial water ;
|
Transport and distribution of: |
- Country:Syrian Arab Republic
- telephone:963-11-2222832
|
Transport and distribution of: - cold and hot industrial water ; - saturated vapours; |
Send inquiry / quota request to Valves
Relate products of Valves
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves ...
Come From GangYe Group Co.,Ltd.
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating ...
Come From GangYe Group Co.,Ltd.
Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class ...
Come From GangYe Group Co.,Ltd.
globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Come From GangYe Group Co.,Ltd.
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? ...
Come From GangYe Group Co.,Ltd.
Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Come From GangYe Group Co.,Ltd.
Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by ...
Come From GangYe Group Co.,Ltd.
Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, ...
Come From GangYe Group Co.,Ltd.
Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are ...
Come From Zhejiang Carbo Bronze Co., LTD
The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is ...
Come From Zhejiang Carbo Bronze Co., LTD
