HS Large Condensate pump

CE

CE

  TBL

220V/60Hz

220V/60Hz

  Volts/Hertz

Option

Option

  Safety switch

yes

yes

  Check valve

1.5M

Meters

  Cable

4.5

3.8

  Net Weight

283*141*257

mm

  Dimensions(W*D*H)

0.67/147

0.58/115

A/W

  Amp/Watts

15M

12M

Meters

  Head -Max

2.2

  Tank Volume

10mm OD Barbed

mm

  Outlet Size

HS-15M

HS-12M

units

Spec.

Use with air conditioning equipment up to 26,000kcal/h
   (30kW.103,000BTU)
1.5M power cord
Duty cycle : 15%/10min
IP20
CE (TBL)
Check valve to prevent back-flow of liquid into the unit

Electronic Sensor switch
Ball bearing drive shaft
Condenser Motor
4 drain holes
Suitable for High-Efficiency, Gas-Furnace Condensate
Leakproof, rustproof, ABS plastic tank
Thermal overload protection

The HS Large Condensate pump Series is a fully automatic condensate removal pump with 10Meters(12m,14m) capacity. The series features a vertical-type pump with sensor switch, ball bearing drive shaft, rust proof, high-impact ABS tank and motor cover, 4 drain holes, removable 10mm O.D barbed check valve. S models include a safety switch that can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow. Pump is rated for high-efficiency gas furnace applications that produce an acidic condensate. Thermally protected pump is CE(TBL).

 

The HS Large Condensate pump Series is a fully automatic condensate removal pump with 10Meters(12m,14m) capacity.

  • Application:Metering
  • Country:South Korea
  • telephone:82-82 31 559 6536 7
Application: Metering
*Your name:
*Your Email:
*To:seo kwang digital
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Phe-200 (J) Aging Resistance Large Diameter Belt Drive Gas Cleaning Slurry Pump

PH(J) Series Slurry Pump Application: PH(J) series of slurry pumps are cantilever centrifugal slurry pumps, which are suitable for transporting particles with small particle size (diameter less than 1mm), no sharp corners and high-concentration slurry. They can also transport ...

Come From Pansto Pump Co., Ltd

Phd-100 (J) Large Load Support Capacity Rubber Lined Backwash Pump

PH(J) Series Slurry Pump Application: PH(J) series of slurry pumps are cantilever centrifugal slurry pumps, which are suitable for transporting particles with small particle size (diameter less than 1mm), no sharp corners and high-concentration slurry. They can also transport ...

Come From Pansto Pump Co., Ltd

24024-X0-HS Impeller for Mission 14x12x22 Centrifugal Pump

Description Sandman™ Mission 14x12x22 Centrifugal Pump Mission Magnum XP Blender Pump is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume ...

Come From Hebei Tobee Pump Co.,Limited·

Sandman™ manufactures the Mission Magnum XP series Large Blender Pump

Design Features: √ Full-open wide impeller. √ Long life no adjustment mechanical seal available for near zero leakage. √ Thick, concentric casing with replaceable casing wear pad. √ Hard iron and high chrome alloy material optional. √ Large power to ensure large flow ...

Come From Hebei Tobee Pump Co.,Limited·

Tobee® Impeller 24024-X0-HS for 14x12-22 Frac Discharge Pump

P/N: 24024-X0-HS (662005003) Mission Magnum XP Blender Pump and MCM XL Pump are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume mobile and ...

Come From Hebei Tobee Pump Co.,Limited·

Tobee® Mission Magnum XP Large Blender Pump 14x12x22 for oil and gas fracking

Sandman™ manufactures the Mission Magnum XP series Large Blender Pump from 8x6x18, 12x10x23, 14x12x22, the 14x12x22 XP Centrifugal Pumps Mission Magnum XP Blender Pumps XP Centrifugal Pumps Main Parts • Heavy Duty Pedestal – heavy duty frames are manufactured from cast ...

Come From Hebei Tobee Pump Co.,Limited·

Tobee® Expeller Ring G029HS1 for 12/10 Ferrosilicon Slurry Pump

Tobee® G029HS1A05 Slurry Pump Expeller Ring Tobee 12/10 AH Slurry Pump Tobee® Slurry Pump parts widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet crushers, SAG mill discharge, Fine Primary ...

Come From Hebei Tobee pump

Tobee® Mission Magnum XP 14×12 Frac Pump Impeller 24024-X0-HS

Description P/N: 24024-X0-HS (662005003) Mission Magnum XP Blender Pump and MCM XL Pump are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume ...

Come From Hebei Tobee Pump Co.,Limited·

Tobee® Expeller Ring G029HS1 for 12/10 Ferrosilicon Slurry Pump

Tobee® G029HS1A05 Slurry Pump Expeller Ring Tobee 12/10 AH Slurry Pump Tobee® Slurry Pump parts widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet crushers, SAG mill discharge, Fine Primary ...

Come From Hebei Tobee pump

Tobee® Expeller Ring G029HS1 for 12/10 Ferrosilicon Slurry Pump

Tobee® G029HS1A05 Slurry Pump Expeller Ring Tobee 12/10 AH Slurry Pump Tobee® Slurry Pump parts widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet crushers, SAG mill discharge, Fine Primary ...

Come From Hebei Tobee pump