Fuel Pump Mounting:
VENOM recommends mounting this pump directly to the vehicles frame, as close to the fuel tank as possible. Billet mounting brackets available part #FPB-001
Fuel Pump Plumbing:
Fuel adapters, available at any performance retailer are required to connect the pump inlet and outlet to the vehicles fuel lines see diagram 1. for sizes.
VENOM recommends the use of a 60 micron pre-filter before the pump inlet and a 30 micron filter after the outlet.
Electrical Connection:
VENOM recommends the use of a 30 amp universal relay to properly install the positive (+) connection for this fuel pump. Relays are available at most automotive
retailers and come with installation directions. A separate fuel pump activation switch or connection to a 12v key-on power source is required to control pump activation.
The fuel pump negative terminal (-) connects to a known good chassis ground or directly to the negative battery cable.