12v dc gear motor with wireless remote control

This is a single speed system.

Latch Switch Option:  The wireless controller functions as a reversible latch control switch from a 12v dc
power source.  By pressing the right side button once, the motor runs in one direction continuously, by
pressing the right side button once again, the motor stops; by pressing the left side button once, the
motor runs in the opposite direction continuously, by pressing the left side button once again, the motor
stops. Current rating is 3 amps.  Two transmitters (with batteries) are included in this package. 
Wireless signal range is 100 ft.

Momentary Switch Option:  The wireless controller functions as a reversible momentary control switch
from a 12v dc power source. By holding down the right side button, the motor runs in one direction until
the user releases the button; by holding down the left side button, the motor runs in the opposite
direction until the user releases the button. Current rating is 3 amps.  Two transmitters (with batteries)
are included in this package.  Wireless signal range is 100 ft.

ON/OFF Switch Option:  The wireless controller functions as a on/off switch on the 12v dc power source. 
By pressing the button "on" once, the motor starts running continuously; by pressing the button "off"
once, the motor stops running. Current rating is 15 amps.  Two transmitters (with batteries) are included
in this package.  Wireless signal range is 100 ft.

The gear motor is measured to be 7 inch long and the motor itself has a diameter of 2.5 inches.  Drive
shaft is 10mm in diameter with 2 flats where flat to flat is 6mm.  The shaft has a threaded end that is to
fit a M6 tightening nut.  Rated voltage of this gear motor is 13.5 VDC and maximum speed is 50 RPM. 
Rated output load is 60 watts and output toruqe at 50 RPM is 11.5 N-m (8.5 ft-lb).  Mounting is based on
M6 screw mounting.

This is a brand new electric gear motor that has an extremely high torque and is equipped with a
wireless controller.

12v dc gear motor with wireless remote control

This is a single speed system.

Latch Switch Option:  The wireless controller functions as a reversible latch control switch from a 12v dc
power source.  By pressing the right side button once, the motor runs in one direction continuously, by
pressing the right side button once again, the motor stops; by pressing the left side button once, the
motor runs in the opposite direction continuously, by pressing the left side button once again, the motor
stops. Current rating is 3 amps.  Two transmitters (with batteries) are included in this package. 
Wireless signal range is 100 ft.

Momentary Switch Option:  The wireless controller functions as a reversible momentary control switch
from a 12v dc power source. By holding down the right side button, the motor runs in one direction until
the user releases the button; by holding down the left side button, the motor runs in the opposite
direction until the user releases the button. Current rating is 3 amps.  Two transmitters (with batteries)
are included in this package.  Wireless signal range is 100 ft.

ON/OFF Switch Option:  The wireless controller functions as a on/off switch on the 12v dc power source. 
By pressing the button "on" once, the motor starts running continuously; by pressing the button "off"
once, the motor stops running. Current rating is 15 amps.  Two transmitters (with batteries) are included
in this package.  Wireless signal range is 100 ft.

The gear motor is measured to be 7 inch long and the motor itself has a diameter of 2.5 inches.  Drive
shaft is 10mm in diameter with 2 flats where flat to flat is 6mm.  The shaft has a threaded end that is to
fit a M6 tightening nut.  Rated voltage of this gear motor is 13.5 VDC and maximum speed is 50 RPM. 
Rated output load is 60 watts and output toruqe at 50 RPM is 11.5 N-m (8.5 ft-lb).  Mounting is based on
M6 screw mounting.

This is a brand new electric gear motor that has an extremely high torque and is equipped with a
wireless controller.

12v dc gear motor with wireless remote control