Microporous Membrane Fiter

Instructions:
1.Clean the filter and the connected parts of the filter thoroughly and install filter element and crust in the right way.
2.Examine whether the inflating pump is veering before starting, examine whether the connection is close, and the valves are closed.
3.Open the importing liquid valve slowly, through the exhaust then open the discharge valve to filter normally.
4.If filter pressure difference is bigger than 0.1mpa or the floating declining obliviously, which reflects the most part of filter element is blocked, then this situation can be resolved by cleaning and recoiling and change the filter element on time.

Parameters:
Filter amount: 0.05-20 t/h
Voltage: 0.1-0.6mps
Filter element quantity: 1,3,5,7,9,11,13,15
Filter temperature: