SMT WIPER
Product Details
8. Various specifications for different brand of SMT machines
7. Can be re-used for cost effective cleaning
6. Soft and low-lint
5. No chemical binders or adhesives
4. Solvent-resistant
3. Strong wet strength both in dry and wet circumstances
2. Acid- , base- , and solvent-resistant
1. Excellent liquid absorbency
1.Excellent liquid absorbency
2. Acid- , base- , and solvent-resistant
3.Strong wet strength
- color:white
- Place of Origin:Zhejiang, China
- Country:China (Mainland)
- telephone:86-571-86727428
| color: | white |
| Place of Origin: | Zhejiang, China |
Send inquiry / quota request to SMT WIPER
Relate products of SMT WIPER
The rear wiper blade arm is the wiper of the rear windshield of the vehicle, which is usually equipped on SUVs, MPVs, hatchbacks. The influence of high-speed airflow must be considered before the rear wiper is application. Tthe hatchback rear window has a relatively small ...
SMT PCB Assembly As SMT assembly supplier, GreensTone SMT production runs with automated SMT production processes, including single or double-sided component insertions. STM components include passive Component: components as small as 01005, 0201,0402. ICs like BGA: handle BGA ...
The system is not only as simple as wiping the water off the windshield, but also wipes the rainwater on the glass surface into a uniform water film layer, allowing the light to pass through smoothly without refraction to ensure the driver\'s vision is clear and safety driving. ...
Because of legal requirements, almost everywhere cars must be equipped with windshield wiper cutter. The windshield wiper cutter also has the characteristics of heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, can fit the windshield, reducing ...
Intermittent Relay JTKW Contact arrangement 1A, 1B, 1C Dielectric strength4) 500VAC Voltage drop(initial)1) Typ.: 50mV(at 10A) Max.: 250mV(at 10A) Operate time Max.: 10ms (at nomi.vol.) Max. continuous current2) 35A(at 23°C, 10min) 25A(at 23°C, 1h) Release time5) Max.: 5ms ...
Come From Ningbo Zettler Electronics Co., Ltd.
china smd assembly and manufacturing is the process of connecting components to a printed circuit board (PCB) to create an electrically functional system. It involves soldering components to the board, such as integrated circuits, resistors, capacitors, transistors, and ...
Come From GOLDEN TRIANGLE GROUP LTD
The Liner Wiper Plug may be shear-pinned on the bottom of the setting tool. The conjunction with pump down plug keeps mud to be separated from cement and removes the cement from the inside of the liner. The Saigao latch-in liner wiper plug is similar in design to the standard ...
Come From Shandong Saigao Group Corporation
SMT PCB Assembly As SMT assembly supplier, GreensTone SMT production runs with automated SMT production processes, including single or double-sided component insertions. STM components include passive Component: components as small as 01005, 0201,0402. ICs like BGA: handle BGA ...
Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could move upward or downward and rotate freely on the mandrel, there are several spiral hard alloy blades welded on the sliding sleeve, ...
Come From Shandong Saigao Group Corporation
With the popularity of the Internet of Things (IOT), life has become intelligent. The Internet of Vehicles, smart home systems, various communication modules, and 5G communication modules you come into contact with are inseparable from the use of pick and place machine. The ...
Come From HangZhouTronstol technology Co., Ltd
