Purpose
The temperature and humidity tester is designed for testing the capability of high low temperature resistant to know the limit to high and low temperature, humidity resistant so that can avoid the products cracked, sparking, curly and aging and so on. It is suitable for the industries of electron, electrical equipment, motor vehicle, motorcycle, metal, chemical material, building materials, luggage, adhesion tape, printing, packaging, etc.
Specification:
Interior Dimension (W×H×D)CM | 40×40×40 (available to customize) |
Exterior Dimension (W×H×D)CM | 95×88×84 |
Capacity(L) | 64L |
Temp. Range | 0℃、-20℃、-40℃、-70℃~150℃ |
Humidity range | 20%~98%RH |
Humidity stability | ±1.5% |
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH |
Heating Up Average Speed | about 3℃/minute |
Cooling Down Average Speed | about 1℃/minute |
Temp. Uniformity | ±1℃ |
Temp. Stability | ±0.3℃ |
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input |
Program capacity | 120 porgrams and each program can set 100 sections |
Heating System | SUS#304, stainless steel heater |
Cooling System | Adopt unary type full-closed air-cool refrigeration system above -20℃, adopt binary type full-closed air-cool refrigeration system below -40℃ |
Inner & Outer Material |
Inner: SUS#304 stainless steel Outer: cold-roll steel sheets baking finish |
Insulation Material | Rockwool and rigid polyurethane foam insulation |
Safety Device | Breaker, compressor overload, ultra-temperature, power failure, temperature limit protection and fault alarm |
Standard Accessories | Automatic demist fogging glass window, 2 sets of adjustable upper and lower interlayer, test hole(diameter 50mm), chamber lamp |
Power | Single phase, AC 220V ±10%,50/60Hz |
As an electronic control element, the electronic expansion valve located in the constant temperature and humidity test chamber adjustment system has high accuracy, fast action, accurate action, and obvious energy-saving effect, which can realize the optimal control of the ...
Desktop constant temperature and humidity storage cabinet(YCT-080) Introduction&Application: Desktop constant temperature and humidity storage cabinet ( climatic/ climate/ environment/environmental test chambers) simulate the effects that a range of temperature and humidity ...
Walk-in Heating Cooling Temperature Humidity Test Chamber Room for test car truck Walk-in Temperature Humidity Test Chamber Application: Walk-in whole auto heating cooling humidity test room( climatic/ climate/ environment/environmental test chambers) simulates the effects that ...
Dingtao Industrial Co.,Ltd Brand:wonderful-test Temperature Humidity Test Chamber 80A Technical Parameter Type WT-H 80A WT-H 150A WT-H 416A WT-H 800A WT-H 80B WT-H 150B WT-H 416B WT-H 800B WT-H 80C WT-H 150C WT-H 416C WT-H 800C WT-H 150D AHL -416D WT-H 800D Inside Dimension mm ...
Product Summary The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building ...
Purpose The programmable temperature and humidity test chamber, known as environmental chamber, is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical ...
Specifications Walk-In High and Low Temperature (Humidity) Cycling Test Chambers ETZ High and Low Temperature Chambers ETZ8/4010 ETZ12/4010 ETZ17/4010 ETZ22/4010 ETZ28/4010 ECZ Humidity Cycling Chambers ECZ8/010 ECZ12/010 ECZ17/010 ECZ22/010 ECZ28/010 ETCZ Climate Cycling ...
Model LRHS-101C-LS 1.2. Humidity range 30% to 98% RH 1.3. Temperature uniformity less than or equal to2deg C (empty load) 1.4. Humidity uniformity +2% -3% RH 1.5. Temperature volatility +-0.5deg C(empty load) 1.6. Humidity volatility +-2% 1.7. Temperature deviation ...