Purpose
This tester is designed as improved model for environment testing, installation high and low temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance. Can remove the chamber to increase use space and bring convenience when using room temperature tests.
Software Function
Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; can conduct tensile, compression, bending, shearing, tearing and peeling test; use PC and interface board for data collection, preservation, processing and printing test result; can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.
Specification
Capacity : | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN ( can select double capacities reparation) |
Temperature Range: | 0, -20, -40, -60, -70℃~150℃ |
Display: | Computer display mode |
Force Resolution: | 1/500,000 |
Force Accuracy : | ≤±0.3% |
Stroke Resolution: | 0.005mm |
Control Mode: | Tensile tester all computerized operation mode |
Temp. Control: | PID automatic calculation, stable error |
Display Accuracy: | 0.1℃ |
Temp. Accuracy: | ±1℃ |
Circulation System: | Fan force circulation system |
Heating System: | stainless steel heat radiation type of heater |
Cooling System: | Fan cooling type, high-efficiency compressor, environmental protection cooling medium |
Protection Device: | Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device |
Chamber Material: | SUS#304 stainless steel |
Test Stroke: | 1300mm (after removing chamber, stand-alone operation and use tensile machine) |
Test Width: | 720mm (after removing chamber, stand-alone operation and use tensile machine) |
Test Speed: | 0.5~500mm/min, can set by computer, with up & down fast adjustment button of grips |
Force Unit Switch: | Kgf, N, Ibf, g, ton, Mpa |
Stop Mode: | Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function |
Machine Dimension: | 110×160×220cm(W×D×H) |
Machine Drive : | Servo motor drive, synchronous wheel and precision ball screw drive |
Power : | 400W |
Machine Weight: | Approx 420kg |
Power Supply: | 220V 50/60HZ 30A |
Standard Device : | Extension pole of grips, heat abstractor, 1 set of grips, computer software, USB computer connection wires |
Optional : | Personal computer |
All high low temperature chambers need to undergo rigorous testing before they can be put on the market for sale and use. Airtightness is considered the most important condition when going through testing. If the chamber doesn\'t meet the airtightness requirement, it definitely ...
VF150 vacuum fryer: Energy efficiency (under vacuum frying temperature below 130 degrees SM, 60 degrees less than the usual method of frying in deep fat). \"dry product\" as a result of roasting useful for preserving the health of color, texture and palatability.effectiveness of ...
Purpose This tester is designed as improved model for environment testing, installation high temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance. Can ...
Purpose High Low Temperature Tensile Compression Tester is designed as improved model for environment testing, installation high temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength ...
Purpose This tester is designed as improved model for environment testing, installation high and low temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical ...
Product Description It is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 ...
Specifications Walk-In High and Low Temperature (Humidity) Cycling Test Chambers ETZ High and Low Temperature Chambers ETZ8/4010 ETZ12/4010 ETZ17/4010 ETZ22/4010 ETZ28/4010 ECZ Humidity Cycling Chambers ECZ8/010 ECZ12/010 ECZ17/010 ECZ22/010 ECZ28/010 ETCZ Climate Cycling ...
Model ET4008 Test Area Volume (L) 80 Temp. Range (℃) -40/+180 Temp. Fluctuation (℃) ±0.1 –±0.5 Temp. Uniformity (℃) ±0.5 –±2.0 Heat Up Rate (℃/min) 3.3 Cool Down Rate (℃/min) 3.0 Test Area Dimension 400*400*500 (W*D*H mm) Exterior Dimension 600*1000*1750 ...
Model LRHS-101C-LS 1.2. Humidity range 30% to 98% RH 1.3. Temperature uniformity less than or equal to2deg C (empty load) 1.4. Humidity uniformity +2% -3% RH 1.5. Temperature volatility +-0.5deg C(empty load) 1.6. Humidity volatility +-2% 1.7. Temperature deviation ...