Purpose
This tester is designed for testing display screens compression resistance under a certain load.It is popular with manufacturers of display screens,research,develop and teste computer screen or concerning display screens.It may test compression resistance of any point in flat surface by adjusting X and Y axle, order Z axle move down by system after position,and keep set time,finish force value and time test graph,then get compression resistance of the specimen from that graph.
Standard
ISO 7500-1 , JJG475-88 , ASTM E4 , DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2, BS1610,GB T228
Specification
Capacity: | 10N,20N,50N,100N,200N,500N,1KN,2KN,5KN(two capacities is available) |
Force resolution: | 1/500,000 |
Force accuracy: | ≤±0.3% |
Travel resolution: | 0.005mm |
Control mode: | Display control or computer control |
Stroke(w/o grips): | 350mm |
Test space: | 600mm×600mm |
Test speed: | 0.5~500mm/min |
Force unit conversion: | kgf,N,Ibf,g,ton,Mpa |
Stop mode: | over-load stop,emergency stop,specimen broken automatic stop,top and bottom limitation automatic stop,automatic reset function |
Machine Dimension: | 96×45×97cm(W×D×H) |
Machine Weight: | approx.80kgs |
Motor: | servo motor drive,synchronizing wheel and presion balls screw driving |
Power: | 400W |
Power supply: | 220V 50/60HZ 10A |
Standard accessories: | a set of grips,english operation manual |
KRD101 Packaging Compression Tester KRD101 series packaging compression tester is the ideal equipment for the compression strength test of various packaging containers with the features of advanced technology, complete functions, reliable performance, easy control and ...
Brief Introduction: The TABER Multi-Finger ScratchTester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage not classified as ordinary wear. Based ...
KRD101 series packaging compression tester is the ideal equipment for the compression strength test of various packaging containers with the features of advanced technology, complete functions, reliable performance, easy control and operation. It is designed to assess the ...
Taber Abrasion Tester The method is using the standard knife cutting the specimen, and then using the regulated model of grinding wheel with loading weight to be abrased, Specimen to be removed after rotation to reach a certain number, observe the condition of the specimen or ...
Synthetic Blood Penetration Resistance Tester is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure. Applicable Standards: ASTM F1670; ASTM F1671; ASTM F903; ISO 16603; ISO 16604; GB ...
medical protective clothing blood penetration resistance testeris applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure. Product Introduction 1. The protruding sample fixing device can simulate the ...
Mask respiratory resistance testeris used to measure the respiratory resistance and expiratory resistance of respirators and masks under the specified conditions. Applicable to the national labor protection supplies inspection agency, mask manufacturers related inspection and ...
Standards: ISO 22609:2004 Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected) ASTM F1862-07Standard Test Method for Resistance of Medical Face Masks ...
The textile airflow resistance tester is used to determine the anti-penetration properties of ordinary fabrics and medical protective masks to airflow at a constant flow rate . It is mainly used for the determination of air penetration of textiles ,cotton, and space cotton. The ...
Model: CHD1200 Description: CHD1200 Mining Intrinsically Safe Resistance Tester MA number: MFA150190 KA number: KFA150020 ExibI: 320150858 ExiaII: CMExC17.4383 Patent No. ZL 2015 2 0977177.7 Introduction: 1. Applicable for grounding resistance and circuit resistance measurement ...