6 t/h Capacity FUYU High Efficiency Desulfurization gypsum briquette machine

Desulfurization gypsum briquette machine

1. Product introduction:

Desulfurization gypsum pressure ball machine can be used to suppress the end of coal, iron, coal, aluminum, iron, iron oxide, carbon powder, charcoal powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke and other various kinds of powder, powder materials, waste, waste, widely used in refractories, power plant, metallurgy, chemical industry, energy, transport, heating and other industries, the pressure ball machine production of molding material, environmental protection and energy saving, convenient transportation, improve the utilization of the waste material, and has good economic benefit and social benefit.

2. Working principle:

Desulfurization gypsum pressure ball machine is the main motor: V belt, to speed reducer, speed reducer through coupling to the driving shaft by a pair of open gears, ensure two roller axis synchronization (constant velocity reverse passive roller hydraulic cylinder, wherein the piston pushes the "constant pressure by the oblique iron counter), and by the hydraulic circuit hydraulic control valve and the accumulator can ensure the system pressure, the material from the storage bin through quantitative equipment evenly into the molding machine hopper, hopper through the regulation of the regulation on the gate, so that the material evenly into the middle of the roll, roll on isokinetic and reverse operation of the unit forming pressure compression material from small to large, reached the maximum in the center line of roll forming pressure, the material after forming pressure decreases rapidly and make the material into the ball, the ball goes off.

3. Technological process：

The high moisture content of the desulfurization gypsum can be pressed into a ball at a time, without any adhesive, the purity is guaranteed, and the direct forming process is not needed to follow the drying process, and is more favorable for the connection and transformation of the existing processes. Ball high strength, suitable for all kinds of transportation, reduce the packaging cost, improve the product transport capacity; abrasives, influence the mill yield does not appear after desulfurization gypsum after forming put into mill; desulfurization gypsum special pressure ball machine compact structure, convenient maintenance, simple operation, craft short process, low energy consumption, the failure rate low, mainly roll part with high quality alloy steel material (patent) can greatly improve the wear resistance and pressure ability, make the machine has a long service life.

Pressed into a pellet diameter generally between the 20-80mm, the pass rate of 85%, compressive strength of 30n, pellet desulfurization gypsum belongs to the material process and the formation of products, its chemical composition and wet desulphurization gypsum powder on exactly the same, change is not only some of its physical properties, such as the mobility of pellet desulfurization gypsum is very good, it won't happen again adhesion and blockage, easy to transport and in the cement production process. Therefore, the development of this kind of spherical FGD gypsum has opened up a new way for the application of FGD gypsum in cement production.

Gongyi Fu Yu Machinery Co., Ltd. is specialized in the production of pressure ball machine, welcome to consult the factory, telephone 86-18538292735, http://www.ball-press-machine.com. E-mail:fybriquettemachine@yahoo.com.