GA-96*0 series thermal conductivity silicone rubber have good thermal conductive property, excellent heat transfer performance. Silicone rubber thermal properties GA-96*0 Series Heat Cure Rubber Feature: good thermal conductive property, good processability among thermally ...
Thermal Conductive Insulating Fabric Tape with Silicone Adhesive Name : Conductive Fabric Tape Size: Width: Customized * 50m length Description: l Type: Anti electromagnetic radiation l Feature: Conductive fabric has excellent softness and excellent bending resistance, ...
il-pad is a clean and efficient TIM material for a wide range of electronic components or between other heat-generating devices and chassis. Bornsun\'s R&D center enable us to provide not only products but also best solution for our clients. ROHS Compliant: Yes UL recognized: ...
ROHS Compliant: Yes UL recognized: Yes Features and Benefits: Thermal conductivity: 1~5.5 W/m·K Excellent thermal performance Good reliability Superior ability to flow and conform to interfaces Non-toxic, non-corrosive Application: 1. Power supply 2.Between a CPU and a heat ...
ZS-GF-5299 1.Features ZS-GF-5299 is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which ...
ZS-GF-5299 is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC ...
SPECIFICATION TRANSPORT STORAGE 1. This product is stored in a cool, dry place, 1 year shelf life . 2. This product is non-dangerous goods, according to general chemical transport. NOTE 1. This product is not a dangerous goods, but avoid contacting eye. 2. This product ...
Appearance Translucent And Half Flow Relative Density 0.95~1.05 (g/cm3) Tack Free Time ≤90 (min) Completely Cure Time 3~7(d) After the curing Hardness 35~45 (Shore A) Tensile Strength ≥1.0 (MPa) Break Elongation ≥50(%) The Temperature Range -60~200 (℃) ...
Appearance White Paste Penetration 170~300(1/10mm, 25℃) Specific Gravity 2.7~3.0 Oil Separation ≤1.0(%)(200℃, 8h) Volatile ≤1.0(%)(200℃,8h) Breakdown Voltage Strength ≥10(kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 3.8-4.2(w/m.k) 1 ...
Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5(MPa) Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35~45(Shore A) Temperature Range -60~200(℃) Volume ...