current transformer analyzer
Product Quick Detail
- 1
- 1
- Wuhan Hubei
- China
- 1
- 1
- Packaging
- wooden case
- Delivery
- 7 days
Specifications
1. Product Name:
CT PT Analyzer HYVA-405
2. Equipment Description:
| Tests for Current Transformer: | Tests for Potencial Transformer: |
|
1 Excitation curve and parameters test
2 Turns ratio test
3 Ratio and phase error test
4 Polarity mark check
5 Winding resistance measurement
6 Secondary loop burden measurement
7 Error line curve test for protection CT
8 Transient CT parameters test
9 CT nameplate guess
10 Saturation hysteresis loop curve measurement
|
1 Turns ratio test
2 Ratio error and phase angle error test
3 Polarity test
4 Secondary burden test
5 Winding resistance test
|
|
1 CT nameplate check
2 CT parameters check in work burden
3 CT transient parameters analysis
4 CT ratio and phase error calibration
5 PT routine test
|
3.Technical Parameters:
|
1 Test standards: IEC60044-1, IEC60044-6, IEC60044-2, IEC60044-5, C57.13
2 Power supply: AC220V±10%, 50/60Hz±10%
3 Voltage output: 0.1~180V (AC)
4 Current output: 0.001~5A(RMS)
5 Power output: 500VA
6 Maximum knee voltage measurement: 45KV
7 Current measurement:
Range: 0~10A (automatically change range in 0.1/0.4/2/10A)
Error: <±0.1%+0.01%FS
8 Voltage measurement:
Range: 0~200V (automatically change range in 1V/10V/70V/200V)
Error: < ±0.1%+0.01%FS
9 Turns ratio measurement:
Range:1~35000
1~2000 error<0.05%
2000~5000 error<0.1%
5000~35000 error<0.2%
10 Phase measurement: error: ±2min; resolution: 0.01min
11 Winding resistance measurement:
Range: 0~8kΩ (automatically change range in 2ohm/20ohm/80ohm/800ohm/8kohm)
Error: < 0.2%RDG+0.02%FS
Maximum resolution: 0.1mΩ
12 Temperature measurement:-50~100 Celsius degree; error<3 Celsius degree
|
13 CT Secondary burden:
Range: 0~160ohm (automatically change range in 2ohm/20ohm/80ohm/160ohm)
Error: <0.2%RDG+0.02%FS
Maximum resolution: 0.001ohm
14 PT Secondary burden:
Range: 0~80kohm (automatically change range in 800ohm/8kohm/80kohm)
Error :<0.2%RDG+0.02%FS
Maximum resolution: 0.1ohm
15 PT ratio measurement:
Range: 1~35000
1~10000 error<0.1%
10000~35000 error<0.2%
16 PT ratio error measurement: Typical error <0.05%, Maximum Error<0.1%
17 PT phase angle measurement: maximum error < 3min
18 Make evaluation for test results according to selected standards
19 Make word report for test result
20 Make word reports one time for multi-group test records on the PC
21 Calculate the ratio errors and phase angle errors at rated burden and working burden in one time test
22 Compare excitation curves with saved excitation curves in the same window
23 Memory capacity: >1000 groups test results
24 Working condition: temperature: -10℃~50℃; moist: ≤90%
|
- Country: China (Mainland)
- Business Type: Manufacturer,Distributor/Wholesaler,Retailer
- Market:Americas,Europe
- Founded Year:1997
- Address:4F,B7,Optical Valley International Headquarters Industrial Park,No.62,Optical Valley Rd, Wuhan,China,430074
- Contact:Shuyue Wang
Other products from Wuhan Huaying Electric Power Tech & Science Co.,ltd
Relate products of current transformer analyzer
Split Core Current Transformer The appearance is nice and the installation and wiring are convenient. AKH-0.66/K-Φ series split type ct transformers are mainly used in reconstructing projects of urban and rural power grids. Product has the advantages of small size, high ...
The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device, used for cable test work. It can even measure up to 3000A AC large current and output 0-5A AC current for other measuring or ...
Acrel AKH-0.66/K series current transformer split core are mainly used in reconstructing projects of urban and rural power grids. The split core current sensors can be mounted easily without the removal of the primary bus. They also can be operated with electricity, which ...
Acrel AKH-0.66/K series split core current transformer are mainly used in reconstructing projects of urban and rural power grids. The split core current sensors can be mounted easily without the removal of the primary bus. They also can be operated with electricity, which ...
The appearance is nice and the installation and wiring are convenient. AKH-0.66/K-Φ series split current transformers are mainly used in reconstructing projects of urban and rural power grids. Product has the advantages of small size, high accuracy, strong load capacity, easy ...
Acrel AKH-0.66/K series sct current transformers are mainly used in reconstructing projects of urban and rural power grids. The split core current sensors can be mounted easily without the removal of the primary bus. They also can be operated with electricity, which prevents ...
Transformer manual coil winding machine Special equipment for distribution Transformer coils. The distribution Transformer is oblong or circular coil with a radius ≤ 500 radius ≤ 350, and it can satisfy the winding of amorphous alloy rectangular coil, and the copper wire ...
1.VolmetChina supplier Automatic pressure epoxy insulator hydraulic APG injectionmachine2.APG machine Application:APG machine is applicable forsmall-sized productssuch astransformer, bushing, post insulator, contact cover, sensor, various supports, etc.3.Main technical ...
APG Clamping Machines factory 1.high quality clamping mould 2.Supply APG moulds 3.Experienced engineers 4.Long life service Main Technical Parameters 1.VolmetChina supplier Automatic pressure epoxy insulator hydraulic APG injection machine 2.APG machine Application: APG machine ...
Main technical parameters Model -450J VOL-240J VOL-360J Nominal diameters of enameled wire φ0.1~1.5mm φ0.1~1.5mm φ0.1~1.5mm Max rotation diameter of coil φ450mm φ240mm φ360mm Min rotation diameter of coil φ50mm φ50mm φ50mm Max winding breadth 400mm 210mm 350mm Winding ...
