Rib Peeling Roll Stamping Threaded Rebar Couplers

Introduction:

Rib Peeling Rebar Coupler is parallel thread design, more strong connection than tapered thread couplers, and it can made by raw material of 45# round bar (equals to AISI 1045) which tensile strength is higher than 600MPA.

Different Mechanical Splicing Methods of Rebar

Type A: Standard Couplers

When the connecting bar can be rotated.

Consisting of 2 standard threads and 1 coupler.

The first bar is fully engaged inside the coupler (at the production line).

The assembly is completed by rotating the connecting inside the coupler until full engagement.

Type B: Position Couplers (Left-right hand thread)

When the connecting bar is too long or too heavy to turn.

Consisting of 1 standard thread, 1 left hand thread, 1 right-and-left thread

coupler.

The two bars are placed in position, the assembly is completed by turning the wrench until full engagement.

Type C: Transition Couplers (different diameter)

When the connecting bars have different diameters.

Consisting of 2 standard thread and 1 different diameter coupler.

The first bar is fully engaged inside the different diameter coupler

(At the production line).

The assembly is completed by rotating the connecting bar inside the coupler until full engagement.

Advantages:

Our Rebar coupler price is competitive, as we are manufacturer

Full-Tension splice, 100% bar break under tensile tests.

Easy operation, installation and maintenance.

Manufactured under strict quality assurance plan ISO 9001.