Good Performance Double Toothed Roll Crusher

Roll crushers are another form of compression crusher that can be used to crush hard and abrasive materials. They represent a medium-to-high initial investment and maintenance requirements are average. Reduction ratios are up to 3:1. This machine requires one-and-a-quarter horsepower per ton per hour of material crushed to make a 1in product. The product from the roll crusher has almost no oversize. The triple roll crusher is the same as above except that it has a reduction ratio of up to 5:1. Roll crushers typically have lower tonnages than their counterparts and are most noted for their low production of fines and controlled output gradation.

Daily Inspection of Good Performance Double Toothed Roll Crusher/Chinese Roller Crusher:

1 Roller clearance decide crushing strength, keep the clearance in the appropriate range. Adjust the spring pressure, maintain parallel double roller to prevent skewed.

2 Check the roller. The worn roller surface will increase gap between two rollers. Take the turning or grinding skill to repair the roller and adjust the clearance. To reduce the cost, please replace the new roller only when the roller is worn to a certain degree.

5 The parts are loose vibration in the operation of machinery fasteners loose easily, found loose should immediately tightened.

4 Timely adjust the clay tablets and keep clearance of cylinder in 1-1.5 mm to ensure the efficiency of shoveling mud. Scraper is quick-wear part, so timely repair or replace it.

3 Keep Good Performance Double Toothed Roll Crusher/Chinese Roller Crusher parts lubricant top resent wear, especially the rolling bearing. Choose the appropriate lubricating oil, add lubricating oil regularly and timely replace the new lubricating oil.

Henan Fote Heavy Machinery Co., Ltd. is a professional material processing designer and supplier in the world, we have excellent research and development group to provide our clients the optimized material processing projects. We can provide our customers the all-sided produce project such as aggregate production line, mineral ore processing plant, sand making plant, autoclaved aerated concrete block production equipment and other construction recycle plant to satisfy their production request. Welcome to visit and purchase.

Contact Information

Email: info@sinoftm.com

Website: http://www.ftmmachine.com/products/crushing-machine/36.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China