500°F/260°C Continuous Exposure: Higher Intermittent
Industry Silicone coated Fiberglass Fire Sleeve
Industry Fire sleeve is designed to protect hoses,wires and cables from the hazards of high heat and occasional flame.
Fire Sleeve protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade
silicone rubber.
Resistant to hydraulic fluids, Lubricating oils,and fuels, Silicone Sleeve insulates against energy loss in piping and hosing;protects employees from burns;and allows bunding of wires,hoses,and
cables.
Industry Silicone coated Fiberglass Fire Sleeve is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.
Silicone coated fiberglass Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
Industry Silicone coated Fiberglass Fire Sleeve quick facts | |
Color |
red oxide, blue, gray, gold, black, yellow, pink, silver, purple and green |
Material | Silicone, fiberglass |
Continuous operating temp | 500°F (260°C) |
Max short term exposure | 3000°F (1650°C) |
QIAN-ZE silicone heat sleeve is specialized in protecting wires, cables, hoses, oil lines from extreme heat conditions and occasional direct flames. Good thermal insulation and fire resistant performance make QIAN-ZE fire sleeve for cables withstand continuous exposure to ...
Silicone Coated Fire Heat Shield Sleeve is made by E-glass fiber braided and coated heavy duty pure silicone rubber. This rugged silicone coating makes the fire sleeve resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant ...
Silicone Fiberglass Fire Sleeve Industry Grade is designed with extra-thick, heat-treated,braided high-bulk fiberglass to protect your personnel from hot hoses and piping, while cutting your heat energy losses. Specifiction Silicone Fiberglass Fire Sleeve Industry Grade ...
BSTFLEX Silicone Coated Glass Fiber Fire Sleeve for heat resistant Features: 1. High temperature resistance: Fire sleeving will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. And can ...
BST-FGS-SC Silicone Coated Fiberglass Braided Sleeve, any color is ok. Used to protect transformer lead protection, motor coil leads, component isolation, and power supply wiring. Voltage from 1.5 KV to 10 KV. It is resists most acids and alkalis and is unaffected by most ...
Silicone Rubber Coated Fiberglass Fire Tape is a fiberglass tape coated with iron oxide red silicone rubber. This tape is designed compound sheds molten metal splash immediately, so very little heat transfer occurs. Silicone Coated Fiberglass Tape can withstand repeated ...
Black Silicone Coated Fiberglass Heat Sleeve provides thermal and physical protection with its rugged silicone covering. Starting with braided fiberglass yarns in a flexible substrate; it is then coated with a high grade silicone rubber. This rugged silicone coating makes the ...
500°F/260°C Continuous Exposure: Higher Intermittent Silicone Fiberglass Knitted Fire Sleeve Knitted high bulk glass fiber fire sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). Silicone Fiberglass Knitted Fire ...
500°F/260°C Continuous Exposure: Higher Intermittent Economic Silicone Rubber Fiberglass Braided Fire Sleeve Economic Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The thick is thinner than industry ...