Addition cure Molding Silicone Rubber

FOB Price
USD $12.00 / Piece
Place Of Origin
shenzhen
Minimum Order
200
Packaging
N/A
Delivery
5 Days

Addition cure Molding Silicone Rubber


1. Description:

HY E640 is very suitable for making silicone rubber stone molds. It is featured with extremely low shrinkage, good fluidity and resistance to many kinds of chemicals; This material do not release any by-product with low molecular weight during its curing process, and it's cured from top to bottom and from the inside and outside simultaneously, namely, deep curing. The HY-E sereise platinum cured silicone will not have the problem of degradation, sticky mold surface caused by the existence of by-product of small molecules under certain conditions, (such as closed environment, high temperature). Known from our customer's feedback, it is very convenient to make cement molds, and it is a high-quality silicone for construction industries. Further more, it can be applied to make multiple piece molds for products with complex design.

Specification

- Durable

- High tear strength for replication

- Non-shrinkage

- High simulation

- Cover fine details

2. RTV Silicone Rubber for Artificial Stone Molding- Advantage:

HY E640 is also featured with low shrinkage and nearly nil viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously. It is suitable for the products with medium size or big size.

3. RTV Silicone Rubber for Artificial Stone Molding- Applications:

HY E640 can be used in the field of construction applications. Because the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has some characteristics that the condensation cure type do not have, such as adjustable curing rate, being completely environmentally friendly, and so on. Therefore, our platinum cure silicone is particularly applicable for large stones molds, artificial stone molds, plaster and other architecture elements replication. The following is some detailed data about the performance of this model

4. RTV Silicone Rubber for Artificial Stone Molding- of E-640 Standard Datasheet:

Model Viscosity (cps) Hardness (A°) Tensile strength (Mpa) Tear strength (KN/m) Elongation (%) Mixing ratio (%) Operating time(H) Curing time(H)
HY-E640 30000±8000 42±2 >=4.0 >=7 >=200 2~3 0.5~1 2~5

If you need more information,pls contact Abbie:

Tel:86-755-89311348

Fax:86-755-89948030

Mob:86-18938867560

Mail:hyab at resinpu dot com

Facebook:HYJCY at SZRL dot net

YouTube:silicone0041 at gmail dot com

QQ:2355542681

  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Africa,Americas,Emerging Markets,Asia,European Union,G20
  • Founded Year:1998
  • Address:Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China
  • Contact:Abbie hu
more images of Addition cure Molding Silicone Rubber
*Your name:
*Your Email:
*To:SHENZHEN HYJ TECHONOLOGY CO., LTD.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Silicone Rubber Mold
Silicone Rubber Mold

Silicone rubber is a kind of elastic material, which is widely used in industry and family. It has become an important part of our life. Meanwhile, silicone moldings are becoming more and more important in the world because it is widely used in a variety of industries like ...

Packson Mold Co., Ltd

Silicone Rubber Injection Molding
Silicone Rubber Injection Molding

Packson\'s state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped with 14 sets of Liquid Silicone Rubber (LSR) injection machines. This enables Packson to produce up to 50 million medical-grade LSR components per year, ensuring that clients\' ...

Packson Mold Co., Ltd

Platinum Catalyzed Silicone Rubber For Molding
Platinum Catalyzed Silicone Rubber For Molding

GA-90*1A/B series platinum catalyzed silicone mold making operates easily, A:B: mix evenly according to 1:1 ratio, product transparency is good, suitable for platinum vulcanization. The production of medical and health products needs to be treated by secondary vulcanization at ...

Dongguan Genvan Silicone Technology Co.,Ltd.

Silicone Rubber Injection Molding
Silicone Rubber Injection Molding

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process : Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of ...

Packson Mold Co., Ltd

Silicone Rubber Injection Molding
Silicone Rubber Injection Molding

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of ...

Packson Mold Co., Ltd

SiSiB® HR0100 General Purpose Heat Cured Silicone Rubber for Molding
SiSiB® HR0100 General Purpose Heat Cured Silicone Rubber for Molding

SiSiB® HR0100 is general purpose heat cured elastomer for molding. Technical Data Product HR0130 HR0140 HR0150 Appearance Translucent Translucent Translucent Hardness (Shore A) 30+/-2 40+/-2 50+/-2 Williams Plasticity 130+/-20 160+/-20 215+/-24 Tensile Strength (MPa) Min. 4.0 ...

Nanjing SiSiB Silicones Co., Ltd

Platinum Cure Molding Rubber Silicone RTV
Platinum Cure Molding Rubber Silicone RTV

Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%) HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400 HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 ...

SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD

Silicone Rubber For Architectural Decorations mold
Silicone Rubber For Architectural Decorations mold

1,Silicone Rubber For Architectural Decorations mold Silicone Rubber For Architectural Decorations mold is very suitable for making silicon stone mold. It is featured with extremely low shrinkage, good fluidity and resistance to many kinds of chemicals; This material do not ...

Hong Ye Silicone Rubber Company

HY-210 Condensation Cure Electronic Potting Silicone Rubber
HY-210 Condensation Cure Electronic Potting Silicone Rubber

HY-210can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage. HY-210is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, ...

Hong Ye Silicone Rubber Company

HY-605 RTV-2 Mold Making Silicone Rubber
HY-605 RTV-2 Mold Making Silicone Rubber

HY-605 is a kind of room temperature vulcanized silicone rubber incondensationtype.It’sgenerally named astwopart silicone rubber ,Part A is a flowable liquid, part B is the curing agentor catalyst . It’s mainly used for mold making . HY-605 silicone rubberisusedformaking ...

Hong Ye Silicone Rubber Company