soap mold liquid silicone rubber
Product Quick Detail
- FOB Price
- USD $4.00 / Piece
- Place Of Origin
- GUANGDONG
- Minimum Order
- 1 KG
- Packaging
- 1/5/10/20/25/200 KG
- Delivery
- 3days after payment
Specifications
1.Description of soap mold liquid silicone rubber
C815 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s twocomponents, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability.
2.Characteristics of soap mold liquid silicone rubber
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*Soft hardness
*Copy detailed pattern
*Good flexibility
*Eco-friendly
*Long shelf-time &lifetime
3.Application of soap mold liquid silicone rubber
C815 silicone rubber is perfect molding material., it is suitable to make mold for concrete stone, cement casting , gypsum decocations, plaster product, resin craft, soap,candle, bronze casting, wax, crystal, tyre mold ,shoe mold ,clay casting ,soap mold,ceramic casting ,etc..
C815 Silicone rubber is mainly suitable for small or middle sized product with delicate pattern by pouring operation.
4.Datesheet of soap mold liquid silicone rubber
| Item No. | Hardness (shore A°) | Viscosity (CPS) | Tensile-strength ( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing ratio | operation time (25 ℃ ) | Curing time ( 25 ℃) | shrinkage |
| C815 | 15±1 | 10000±1000 | ≥28 | ≥18 | ≥350 | 100:3 | 20-30 mins | 2~3 h | ≤0.3% |
5. Using instructions of soap mold liquid silicone rubber
Step 1: Prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .
Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone:catalyst=100:2) ,mix the silicone rubber and catalyst evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What’s more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.
Step 4: Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on the prototype
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.
6.Company information
Dongguan Guochuang Organic Silicone Material Co., Ltd. established in 2003, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber and silicone mold. We sets up HongKong GuoChuang silicone technology Co.,Ltd., other affiliated enterprises in 2015
Certifacations of C815 soap mould making liquid silicone rubber
Contact us to get the free sample
E-mail: morgan(at)gcsilicone(dot)net
Skype: morgan(at)gcsilicone(dot)net
Mobile: 0086-13725816787
- Country:
- Business Type:
- Market:
- Founded Year:
- Address:No. 4 Shichang Street, The 2nd Industrial District of Xiaobian, Changan Town, Dongguan China, Dongguan, Guangdong, China
- Contact:Morgan Mai
You may also like
- liquid silicone rubber
- rtv silicone rubber
- silicon rubber
- molding silicone rubber
- making silicone rubber
- printing silicone rubber
- rubber silicone
- silicone rubber gasket
- mould silicone rubber
- mold silicone rubber
- silicone rubber product
- liquid silicon rubber
- silicone rubber seal
- silicone rubber pad
- silicone rubber keypad
- silicone rubber mold
- silicone rubber ring
- quality silicone rubber
- flexible silicone rubber
- silicone rubber
Other products from 国创硅胶
Relate products of soap mold liquid silicone rubber
Silicone rubber is a kind of elastic material, which is widely used in industry and family. It has become an important part of our life. Meanwhile, silicone moldings are becoming more and more important in the world because it is widely used in a variety of industries like ...
Packson\'s state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped with 14 sets of Liquid Silicone Rubber (LSR) injection machines. This enables Packson to produce up to 50 million medical-grade LSR components per year, ensuring that clients\' ...
GA-90*1A/B series platinum catalyzed silicone mold making operates easily, A:B: mix evenly according to 1:1 ratio, product transparency is good, suitable for platinum vulcanization. The production of medical and health products needs to be treated by secondary vulcanization at ...
Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process : Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of ...
Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of ...
Food Grade Liquid Silicone Rubber SiSiB® LR1100 series are paste-like, easily pigmentable two-component liquid silicone rubber for injection molding process. Curing condition: Cure 10 minutes at 140oC, post cure 2 hours at 200oC. Application This liquid silicone product can be ...
SiSiB® HR0100 is general purpose heat cured elastomer for molding. Technical Data Product HR0130 HR0140 HR0150 Appearance Translucent Translucent Translucent Hardness (Shore A) 30+/-2 40+/-2 50+/-2 Williams Plasticity 130+/-20 160+/-20 215+/-24 Tensile Strength (MPa) Min. 4.0 ...
1.Flexible and Non-Stick. Baked Goods Pop Out Easily. 2.Reusable For Up to 3,000 Uses 3.100% Pure, Professional Quality Food-Grade Silicone. 4.Meets US FDA and European LFGB Safety Standards. BPA, PVC and Phthalate FREE Pinch Test Passed. 5.No Chemical Coatings Microwave, Oven, ...
1.Material and Hardness:LSR 55-60A fog face and transparent 2.Counterpart:/ 3.Packaging:/ Dongguan JuYan Silicone Technology Co.,Ltd (a BELLO company) is dedicated to offer high-quality rubber &silicone parts by integrating R&D,production,sales and service ,which are widely ...
Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%) HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400 HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 ...
