24v hydraulic solenoid valve is lighter and rustless than those made of iron. It's added anti-aging to prevent aging after sunlight. And every valve have been pressure tested before shipment (15kg).
1.It can be used in sand filters, replacing two sets of electric or pneumatic valves, easy to be controlled;
2.PA6 (Nylon) material, max working pressure is 1.0MPa;
3.Clamp connection, easy installation and removal;
4.Never rust, corrosion resisting, can be used in weak acid environment;
5.Good aging resistance, can be used in the open air;
6.Switch quickly, good operation stability;
7.Easy to replace parts, low maintenance costs;
8.The diaphragm is made of advanced rubber material which has good elasticity, between rubber is the imported high strength net cloth with good rebound performance;
9.With the bilateral dovetail waterproof rubber seal ring, it prevents water leakage of operation;
10.With the hold hoop on top, it’s much safer and is convenient to change the parts inside;
11.External uses professional nylon paint treatment, excellent appearance.
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves ...
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating ...
Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class ...
globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? ...
Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by ...
Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, ...
Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are ...
The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is ...