Item | Type | ||||
JD24DW | JD24DA | JD24D | JD14D | JD-17D | |
Suitable
Material |
Copper clad steel | Copper clad aluminum | Copper clad steel | Copper clad aluminum | Steel clad copper |
Drawing Die | 24 | 24 | 24 | 14 | 17 |
Inletwire
Diameter |
0.35-0.15
mm |
1.3-0.5
mm |
1.0-0.5
mm |
2.05-1.0 mm |
2.5-1.2 mm |
Outletwire Diameter |
0.15-0.08
mm |
0.4-0.1
mm |
0.2-0.08 mm |
0.8-0.25 mm |
1.0-0.4 mm |
Line Speed |
2000m/min |
2000m/min |
1200m/min |
1000m/min |
|
Main Motor Power | 50-100KW | ||||
Dimension
(LxWxH)M |
1.9*1.35*1.75 |
2.05*1.6*1.9 |
2.6*1.6*1.9 | 5*2.5*2 | |
SpoolerMotor Power(kw) |
3.7/5.5 |
11 |
15 |
15/18 |
37 |
Wire Capacity |
30kg |
30kg |
35kg |
35kg |
200kg |
Weight | 1900kg | 2500kg | 2500kg | 2500kg | 4000kg |
Metal tech Pointing Machine is It is the auxiliary machine of the wire drawing machine, which is used to roll the wire into thin pieces so as to pass through the drawing die of each pass at the initial stage of drawing. Get pointing machine for wire drawing directly from wire ...
Metal Tech high speed wire nail making machines manufacturers is for making nails with large batch, high precision and high production capacity, max. output could reach 760pcs/min, use less manpower, Maximize the production cost for manufacturers. High speed wire nail making ...
Diamond wire saw making machine, diamond wire tool making machine, diamond tool making machine, diamond tool injection molding machine, cable injection molding machine. C frame without tie bar design, horizontal injection vertical close mold. whatsapp/wechat: 0 0 8 6 1 5 2 5 7 1 ...
Cnow supplies wire drawing machine, wire nails making machine, nails polishing machine, rolling machine and coiling devices of nails. Generally there are five steps for coiled screw nails production: Wire drawing for nails; Nails making; Polishing of nails; Rolling of nails ...
Technical specification: 8 blocks 550mm 5.5mm inlet to 1.8 mm outlet Low carbon steel material Designed with Rotating die holder The drawing machine including: Wire scaling and brushing system Dead block machine Complete electrical control board Power: 380 V 60 Hz ...
Wire drawing machine is used for steel, aluminum, copper and other metal wire drawing. The metal wire rod can be drawn by single machine of the unites depends on its sizes. Along with Wire\'s drawing, the rear coiling block is accelerated. simplicity of operator, efficient, ...
Wire drawing machine is used for steel, aluminum, copper and other metal wire drawing. The metal wire rod can be drawn by single machine of the unites depends on its sizes. Along with Wire\'s drawing, the rear coiling block is accelerated. simplicity of operator, efficient, ...
Name CS-C barbed wire making machine Motor 2.2KW Strand wire diameter 2.2-2.8mm Barbed wire diameter 1.8-2.2mm Material Galvanized Wire; PVC Coated Wire; Barb pitch spacing 76mm(3”) 102mm(4”)or as requirement Twist 4 Machine life Over 10 years Overall Dimension ...
Name CS-B single barbed wire making machine Motor 2.2KW Strand wire diameter 1.6-2.6mm Barbed wire diameter 1.6-2.2mm Material Galvanized Wire; Barb pitch spacing 76mm(3”) 102mm(4”)or as requirement Twist 4 Machine life Over 10 years Overall Dimension ...
Name CS-A barbed wire making machine Motor 3KW Strand wire diameter 2.2-2.8mm Barbed wire diameter 1.8-2.2mm Material Galvanized Wire; PVC Coated Wire; Barb pitch spacing 76mm(3”) 102mm(4”)or as requirement Twist 4 Machine life Over 10 years Overall Dimension ...