Model | LRHS-101C-LS |
|
1.2. Humidity range | 30% to 98% RH |
|
|
|
|
1.3. Temperature uniformity | less than or equal to2deg C (empty load) |
|
1.4. Humidity uniformity | +2% -3% RH |
|
1.5. Temperature volatility | +-0.5deg C(empty load) |
|
1.6. Humidity volatility | +-2% |
|
1.7. Temperature deviation | +-2deg C |
|
1.8. Humidity deviation | +-2% |
|
|
|
|
1.9. Temperature decrease rate | 0.7 to 1.0deg C/min |
|
1.10. Temperature increase rate | 1.0 to 3.0deg C/min |
|
1.11. Time setting range | 1 to 9999H |
|
|
|
|
|
||
1.12. Total power | 4.5KW/5.5KW/7.5KW/10.0KW/11.5KW (-20deg C) |
|
|
5.5KW/6.0KW/9.0KW/11.5KW/12.5KW (-40deg C) |
|
1.13. Power supply requirements | 6.0KW/8.0KW/11.5KW/15.5KW/15.5KW (-60deg C) |
|
|
AC380V+-10% 50+-0.5Hz (three-phase five wire system) |
|
It is according to IEC60068-2-1 and IEC60068-2-2. The temperature range is -40~150℃ and humidity is 30%~98%RH with programmable function. The working room size is ...
All high low temperature chambers need to undergo rigorous testing before they can be put on the market for sale and use. Airtightness is considered the most important condition when going through testing. If the chamber doesn\'t meet the airtightness requirement, it definitely ...
High and Low Temperature Humidity Chamber is according toIEC60068-2-1 Specifications: •The chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone ...
High and Low Temperature Humidity Chamber is according toIEC60068-2-1 Specifications: •The chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone ...
Product Description It is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, ...
Product Description It is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 ...
Product Description It is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 ...
Specifications Walk-In High and Low Temperature (Humidity) Cycling Test Chambers ETZ High and Low Temperature Chambers ETZ8/4010 ETZ12/4010 ETZ17/4010 ETZ22/4010 ETZ28/4010 ECZ Humidity Cycling Chambers ECZ8/010 ECZ12/010 ECZ17/010 ECZ22/010 ECZ28/010 ETCZ Climate Cycling ...
Model ET4008 Test Area Volume (L) 80 Temp. Range (℃) -40/+180 Temp. Fluctuation (℃) ±0.1 –±0.5 Temp. Uniformity (℃) ±0.5 –±2.0 Heat Up Rate (℃/min) 3.3 Cool Down Rate (℃/min) 3.0 Test Area Dimension 400*400*500 (W*D*H mm) Exterior Dimension 600*1000*1750 ...