Minimum Order
15 Days

What Is Alkyd Paint Used For?
Epoxy alkyd paint is mainly composed of alkyd resin. It is currently the most used type of paint. It has the advantages of low price, simple application, low requirements for the applying environment, full and hard coating film, good durability and weather resistance, and good decoration and protection. The disadvantage is that the coating film is not easy to meet higher requirements and is not suitable for high decorative occasions. Alkyd resin paint is mainly used for the coating of general woodware, furniture and home decoration, general metal decoration coating, metal anti-corrosion coating, general machinery, automobiles, instrumentation, industrial equipment, etc.

Types of FUXI ® Alkyd Paint
Alkyd Enamel Paint
Alkyd Antirust Paint(Gray)
Acrylic Alkyd Finish
Fast Dry Alkyd Antirust Primer (Iron Red, Gray)
Alkyd Deck Paint
Alkyd Red Lead Antirust Paint
Alkyd Surface Tolerant Antirust Paint
The Advantages of Alkyd Paint

Good gloss and color retention

Good weather resistance

Dry fast

Single component, easy to apply

Alkyd VS Acrylic
Film formation (or volume solid)

Because the molecular weight of alkyd resin is lower, you can get more alkyd in the tank. The volume solids of a good-gloss alkyd resin is about 55%, while an acrylic resin with the same gloss is about 40%. This means that at the same spread rate, the alkyd resin film is 37.5% thicker than the acrylic resin. On the contrary, under the same film-forming conditions, the spreading rate of alkyd resin will increase by 37.5%.

Bad weather

Alkyd resins and acrylic resins form films through completely different mechanisms. The alkyd resin initially loses its solvent by evaporation during the "stickiness" period, and then cures by the aforementioned catalytic/oxidative reaction. The speed of this reaction depends on the temperature and slows down in the cold. However, when the temperature increases, the reaction rate increases. The damage that may be caused to the film during the low temperature drying process is usually limited to some gloss loss.

However, acrylic resin loses moisture by absorbing or evaporating and then forms a film through physical fusion of plastic particles. A temperature below a certain critical level will cause the particles to become too hard to deform and coalesce into a film. This is especially true when high humidity delays the evaporation process and may enter the colder parts of the night. The lack of film coalescence of acrylic resin is an irreversible phenomenon.

Surface treatment

Acrylic resin is a special material that is carried in an aqueous medium. If these are applied to a porous surface, water will be absorbed preferentially, allowing the vehicle to stay on the surface. If the surface is intact, this is a very ideal condition because it will leave all protective or decorative films in place.

On the other hand, alkyd resins are more permeable to porous surfaces due to their lower molecular weight, which can cause film loss on the surface, but also helps to bond and regulate imperfect surfaces. This does not prevent the need for proper surface treatment, but it does give alkyd resins an advantage on suspicious surfaces.

All in all, where the outer surface needs to be coated, if the surface is intact and the weather conditions are favorable, acrylic will usually provide better performance; if the surface is in doubt, alkyd primer and acrylic are a good system.

Alkyd Paint VS Latex
One significant difference between the alkyd and latex paints is that alkyd is oil-based paint, while latex is water-based.


Both alkyd and latex paint have excellent adhesion. Compared with latex paint, alkyd paint has better adhesion on severely chalked surfaces. In addition, latex paint has higher elasticity than alkyd paint.

Color retention

The latex paint is more resistant to fading and chalking when exposed to the sun, but the alkyd paint is more prone to fading.


When applied, alkyd paints are more difficult than latex paints because they are heavier than latex paints. Latex paint is smoother and easily drags on the surface. Alkyd coatings can be used on most surfaces, but should not be used directly on new plaster or concrete. Latex paint is suitable for wood, vinyl siding, brick, stucco and aluminum siding.


Alkyd paint can be cleaned with paint thinner, turpentine, etc. solvent removal, while latex paint can be cleaned with water.

FAQ of Alkyd Paint
The alkyd paint is oil or water based?The alkyd paint is oil or water based?
It is oil paint. Namely, alkyd paint is more VOC for the environment than water-based paints. Also, alkyd paints are more likely to spatter than latex or true oil paints.

Why alkyd primer can not match with epoxy paint?Why alkyd primer can not match with epoxy paint?
The alkyd enamel will not dissolve in its original solvent after curing but will dissolve in the strong solvent. If the surface is overcoated with other types of coatings containing strong solvents, the strong solvents in the coating will attack the alkyd resin coating, causing defects such as skinning and wrinkling of the coating.

How does alkyd paint cure?How does alkyd paint cure?
Alkyd paint is a solid paint film formed by the reaction of oxygen in the air and oil in the paint. The oxygen in the air first reacts with the surface paint film to form a solid paint film. So it takes longer for oxygen to enter the wet film below. The thicker the coating, the longer the time. Therefore, the single-pass wet film of alkyd enamel should not be too thick. Too thick will affect the volatilization of the solvent in the wet film below, resulting in solvent retention and blistering. It will also cause the wet film to not be cured well; if there is water mist or water on the surface of the coating before curing, which prevents the contact between oxygen and the coating, it will also prevent the normal curing of the coating.

As a coating manufacturer, we can provide kinds of industrial paint coating for sale, if you are interested, please contact us.

  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:
  • Founded Year:1994
  • Address:Jingbao Industrial Zone, South Of Jinbao Expressway,Beicang Town, Beichen District,Tianjin,China
  • Contact:Paintinchina com
more images of FUXI ® ALKYD PAINT
*Your name:
*Your Email:
*To:Tianjin Jinhai Special Coatings & Decoration Co., Ltd
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...


FUXI ® ANTISTATIC PAINT The anti static coating for metal is used for the inner wall of the oil tank. The basic function is to protect the steel oil tank from corrosion, protect the oil from pollution, and prevent static electricity. Epoxy resin is the base material, It is ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


Zinc powder is the most important electrochemical antirust pigment. A primer made with a large amount of zinc powder is called a zinc-rich primer. Zinc-rich paint is divided into an inorganic zinc rich primers with silicate as binder and epoxy zinc-rich primer with epoxy resin ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


About polyurethane paint is an important variety in modern anti-corrosion coatings. It has excellent comprehensive performance that other coating systems do not have, especially its low temperature and high humidity curing performance. Aliphatic polyurethane varnish have good ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


The oil storage tank is a container for storing oil products. Long-term exposure to the summer sun and a high-temperature environment causes the surface and internal temperature of the oil storage tank to rise rapidly. Most of the heat is concentrated on the surface of the oil ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


High chlorinated polyethylene paint, also known as HCPE paint, has similar properties to chlorinated rubber. It has excellent water resistance, oil resistance, good weather resistance, strong adhesion, convenient one-component application, and can be used at low temperatures ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


fluorocarbon coating market fluorocarbon surface technologies and fluorocarbon vs fluorocarbon coated fluorocarbon polymer & surface technologies / fluorocarbon surface technologies The high molecular polymer formed by the polymerization of fluoro olefin or the copolymerization ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


Epoxy paints are the most important category of anti-corrosion coating products. They are widely used in: the hull of the ship, deck (including skid board and flight deck, etc.), ballast tanks and cargo tanks; the superstructure of the oil platform, ground pipelines, buried ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd


Chlorinated rubber is a polymer with a random ring structure, with a chlorine content of 65%. The chlorinated rubber floor paint film is dense, and the water vapor and oxygen transmission rate of the paint film are extremely low, so it has good water resistance and rust ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd