Oil Filled Ignition Coils

Minimum Order: 1

Packaging: N/A

Delivery: 15 Days

The oil-filled ignition coil is the first generation coil of the vehicle. It is an open magnetic circuit ignition coil from MAMPS ignition coil factory , which is generally a filling structure. It is made of oil, and the oil-filled inside is both an insulator and a coolant. It must be used in conjunction with the distributor and the oil-filled coil must be connected to the spark plug and distributor using ignition leads. Commonly applied to older vehicles. MAPMS provides various types of oil-filled ignition coils with good sealing performance, no oil leakage, high output voltage and long shelf life.

Key Features of Oil Filled Ignition Coils

good sealing performance.

no oil leakage.

high output voltage.

long shelf life.

How do you test a Oil Filled Coil?

Oil filled ignition coils are common in vintage and classic vehicles. Generally, it is a 12V ignition coil, which acts as a transformer. The voltage needs to be taken from the battery and raised to a few volts to create a spark in the spark plug. Here, we describe how to use a multimeter to test faulty oil ignition coil.

First, turn off the vehicle's engine, open the hood, locate the oil ignition coil, and use a wrench to disconnect the negative battery cable from the engine. The next step is to find the oil ignition coil that connects to the distributor's main ignition and pull it out slightly.

Next, use a wrench to connect the small ground wire inside the engine to one side of the coil wire we identified in the previous step. Now use a calibrated multimeter to measure the resistance, set the function of the multimeter to ohmmeter, and record the resistance value and unit at the same time. With the multimeter set to resistance measurement mode, insert one of its probes into the center opening of the main ignition oil ignition coil leading to the distributor. Insert it inside the oil ignition coil so that it must touch its metal terminals.

After the connection is established, check the reading on the multimeter screen. If it shows a resistance value between 6000 and 15000 ohms, the oil ignition coilis fine. However, if the value is different from the above range, the secondary winding is faulty.

Now touch one of the multimeter's probes with the ground terminal again. However, this time connect another probe to the terminal stud on the other side of the oil ignition coil.

After setting up the connection, check the reading on the meter again. If the resistance value is between 0.4 and 2 ohms, there is no problem with the oil ignition coil. However, if the value is outside this range, there is a problem with the primary winding of the coil. No matter which side of the oil filled ignition coil is faulty, it needs to be removed and replaced.

If you are looking for a reliable ignition coil company, don't hesitate to contact us!

Country: China (Mainland)
Business Type:
Market:
Founded Year:
Address:Room 1505, F15, Bldg T2, 2 Yichuang St, Huangpu 510555, Guangzhou, China
Contact:May Liu

more images of Oil Filled Ignition Coils

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Guangzhou May Import & Export Trading Co.,Ltd
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters : 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

Throttle Position Sensors

SRS Supplemental Restraint System

Starting System in Automobile

Starter Motor

Spark Plugs

Rail Ignition Coils

The ignition coil rail is directly inserted into the cylinder head, including two parts, the head and the rod, which are connected together. The head has a low-voltage socket, and the rod has a high and low voltage winding group with inner iron core and outer iron core. The ...

Guangzhou May Import & Export Trading Co.,Ltd

Pencil Ignition Coils

The Pencil Type Ignition Coil combines the high-voltage ignition wire and the ignition coil into one, which reduces energy loss, and improves combustion and fuel efficiency. Each cylinder is assigned a pencil ignition coil, which is directly installed on the top of the spark ...

Guangzhou May Import & Export Trading Co.,Ltd

Ignition Coil Rubber Boots

MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40KV and high temperature up to 300 degrees. Bulk buy from ignition rubber boots MAMPS ignition coil factory. Ignition Rubber Boots ...

Guangzhou May Import & Export Trading Co.,Ltd

Oil Filled Ignition Coils

The oil filled ignition coil is the first generation coil of the vehicle. It is an open magnetic circuit ignition coil from MAMPS ignition coil factory , which is generally a filling structure. It is made of oil, and the oil-filled inside is both an insulator and a coolant. It ...

Guangzhou May Import & Export Trading Co.,Ltd

Lefoo Oil-filled Diffusion Silicon Pressure Transmitter LFT2800

LEFOO LFT2800 pressure transmitter is widely used in the measurement of fluid medium pressure in test systems such as fire protection, water treatment, water supply systems, air compressors, pneumatic devices, and factory automation. It has excellent anti-corrosion and ...

LEFOO INDUSTRIAL CO.,LTD.

Ignition Coils

Introduction of car ignition coil Winding and potting are the key processes in the production of ignition coils. MAPMS has multiple automatic winding machines realize automatic winding of primary coil and secondary coil. Vacuum at 100pa for 2 minutes to ensure that the air in ...

Guangzhou May Import & Export Trading Co.,Ltd

Ignition Coil Rubber Boots

Guangzhou May Import & Export Trading Co.,Ltd

Application of Ignition Coils

Thecoil ignition system converts the low-voltage circuit into a high-voltage current, which makes the spark plug generate enough sparks to ignite the fuel-air mixture in the engine cylinder. MAPMS ignitioncoils for car meet the requirements for emissions, high engine speed, ...

Guangzhou May Import & Export Trading Co.,Ltd