RISING STEM GATE VALVES

Minimum Order: 1

Packaging: N/A

Delivery: 15 Days

Rising stem gate valve produced by MstnLand, a China gate valves manufacturer, can be used in many situations. The opening and closing part of a rising stem gate valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The rising gate valve can only be fully opened and fully closed, and it cannot be used to adjust or throttle. When the rising stem gate valve is fully open, it has no effect of disturbing the water flow. Sealing is achieved by metal rings on the wedge and the valve body. When the rings are mated to each other, they will provide a seal. By turning a rotary valve stem with functional threads, the wedge moves up and down, allowing the rising stem gate valve to be opened and closed.

Rising Stem Gate Valves Features

Application

Rising stem gate valves produced by professional valve factory are usually made of cast or forged steel and they are suitable for crude oil, water, steam, gas and other non-abrasive media. Rising stem gate valves are designed with a straight bore pattern with rising stem, male threads, yoke, bolted bonnet and stainless steel trim. The open and closed positions of the rising stem gate valve are easily distinguished by the position of the valve stem. The wedges can be replaced without removing the valve from the pipe.

Easy check

With its extensive capabilities, users can detect from a distance whether a valve is open or closed and take an immediate action. Additionally, an optional protection tube located at the top of the rising stem gate valve acts as protection for the rising stem, preventing obstructions from touching the valve stem and indicating whether the valve is fully open. On the stem, accessories such as actuators, extension shafts, gearboxes, sprockets, etc. can be assembled.

Bidirectional flow

Rising stem gate valves allow bidirectional flow direction and are used to close or open media flow. This type of valve can be installed in both horizontal and vertical positions in piping systems. Rising stem gate valves are widely used in processing industries such as palm oil and oil refineries, food industry, petrochemicals, fire protection systems, power plants and cooling systems.

Rising Stem Gate Valves Advantages

Light weight

The body of rising stem gate valves is made of high-grade ductile iron, which is about 20%~30% lighter than the traditional China gate valve and is easy to install and maintain.

Flat-bottomed gate seat

The traditional gate valve often accumulates in the groove at the bottom of the valve due to objects such as stones, wood blocks, cement, iron filings, sundries, etc. after the pipe is washed with water, which is easy to cause the water leakage that cannot be closed tightly. The bottom of the elastic seat seal gate valve adopts the same flat-bottom design as the water pipe machine, which is not easy to cause debris accumulation and makes the fluid flow unobstructed.

Integral lagging

The gate is made of high-quality rubber for the overall inner and outer covering. The first-class rubber vulcanization technology in Europe enables the vulcanized gate to ensure accurate geometric dimensions, and the rubber and the ductile cast gate are firmly bonded, with the advantages of being not easy to fall off and good elastic memory.

Precision casting valve body

The valve body adopts precision casting, and the precise geometric dimensions make the valve body not need any finishing inside to ensure the tightness of the rising stem gate valve.

Rising Stem Gate Valve Vs Non Rising Stem Gate Valve

Rising and non-rising stem gate valves have their own advantages. The stem of the rising stem gate valve is exposed, so whether the valve is open can be easily seen. The stem of non-rising valve produced by professional non rising stem gate valve manufacturers is invisible, so the valve cover needs to be opened to know whether the valve is open. However, the non-rising stem valve takes up less space, while the valve casing protects the stem from corrosion. In addition, their stem moves differently. The stem of the rising stem valve moves up and down through the steering wheel and threads while the stem and steering wheel of the non-rising stem valve are relatively stationary, so the movement of the stem can be realized by direct fixed-point rotation.

If you want to know more about rising stem gate valve drawing and rising stem gate valve dimensions, please visit our website.

We can offer sorts of different types of valves for sale, if you have needs, please leave us a message.

Country: Afghanistan
Business Type:
Market:
Founded Year:
Address:Room A086, No.2 Bonded Port Area, Xinyingwan District, Yangpu Economic Development Zone, Hainan Province
Contact:Michael Zhang

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	MSTN International Technologies Company
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters : 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

CHECK VALVES

CAST STEEL BALL VALVES

CAST IRON GATE VALVES

CAST IRON FILTER

CAST IRON BALL VALVES

Bronze Gate Valve

Bronze Gate Valve China Manufacturer Bronze gate valve for sale uses bronze material, which has excellent wear resistance and corrosion resistance, good casting performance and airtightness. The bronze steam rated gate valve is widely used in higher load parts, such as ...

Zhejiang Carbo Bronze Co., LTD

Duplex Gate Valves

Duplex stainless steel has the advantages of both ferritic stainless steel and austenitic stainless steel: austenitic stainless steel reduces the brittleness, maintains excellent toughness and weldability; ferritic stainless steel improves the yield strength, intergranular ...

Weidouli Valves Co., Ltd

Gate Valve

Gate Valve Main parts for Gate valve consist of Valve Body, Bonnet, Disc, arm, shaft, guide and valve seat. Those parts of a big gate valve, chain operated gate valve, or high pressure gate valve can be made either from gate valve castings or forgings. Available material by ...

WALKSON

ZMWO-A1 WCB Body Flanged Gate Valves

The cast steel gate valve wcb body is made of metal steel material. The opening and closing member of the cast steel gate is the gate, the direction of motion of the shutter is perpendicular to the fluid direction, and the gate valve can only be fully open and complete, and ...

Hebei Leading Metals & Piping Industries Co., Ltd.

ZMSO-D1 Stainless Steel Flanged Gate Valves

Stainless Steel Gate valve Features Small flow resistance. Because the internal medium channel of the valve body is straight-through, the medium is flowing straight, so the flow resistance encounters is small. In order to make a reliable valve seal, it is reasonable to ...

Hebei Leading Metals & Piping Industries Co., Ltd.

ZMIO-D41 DIN3352 F4 Flanged Gate Valves

Din 3352 f4 gate valve is the production standard of the German-labeled valve, which includes metal sealing valves and soft sealing valves. F4 is the structural length of the German-labeled valve, which is included in the DIN3202 standard, and the corresponding is F5. In ...

Hebei Leading Metals & Piping Industries Co., Ltd.

ZMIO-A1 O.S.&Y. Flanged Gate Valves

The rising gate valve is also referred to as a lifting stem gate valve, which is up and down together during the opening and closing process. The handwheel drives the valve stem nut to rotate, and the nut is rotated to drive the valve rod up and down. The valve stem is not ...

Hebei Leading Metals & Piping Industries Co., Ltd.

ZMIN-D51 NRS DIN3352 F5 Flanged Gate Valves

DIN3352 is the production standard of the German standard valve, which includes metal sealing valves and soft sealing valves. F5 is the face-to-face length of the German standard valve, which is included in the DIN3202 standard, and the corresponding is F4. In contrast, the F5 ...

Hebei Leading Metals & Piping Industries Co., Ltd.

ZMIN-A1 Metal Seated Flanged Gate Valves

The flange gate valve is a gate value of the flange, which is most common. The flange gate valve is stable and reliable during the pipeline, so the flange gate valve is often used on the high pressure line. The metal sealing flange is a gate valve that refers to a gate valve of ...

Hebei Leading Metals & Piping Industries Co., Ltd.