CNC HORIZONTAL TURNING LATHE CENTER FOR WHEEL HUB

Minimum Order
1
Packaging
N/A
Delivery
15 Days

The CNC horizontal turning lathe center bed adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC horizontal turning center with better performance on accuracy maintenance and stability for a longer time. DEED model HP800-WC cnc turning machine for sale is mainly used for turning to machine of 12-22inch passenger car wheel and truck bus wheel, CNC horizontal turning lathe center also can be used for turning of similar disc parts.

FEATURES OF CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB
*Mineral casting rectangular hard rail bed has good seismic resistance, small thermal sensitivity coefficient, and good overall rigidity.

*Mineral casting spindle box has small vibration, high speed, and high efficiency, which is about 30% higher than the market average.

*According to the needs of the cnc horizontal turning center industry, specially ordered imported spindle units for machine tools.

*Automatic door structure, less time to open and close the door (within 2S).

*The chip conveyor is separated from the water tank, which makes cleaning and maintenance more convenient

*More reasonable internal layout and strong cooling of flushing chips to avoid chip accumulation without manual cleaning.

*The extremely ingenuity cnc horizontal turning center design brings a more convenient operation and clamping experience.

BENEFITS OF CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB
Mineral casting 45°slant bed. -The maximum length of embedded parts is 1750mm.

45 steel hardened with hardness HRC52 ~ 61.

During cnc horizontal turning center assembly, the accuracy of the linear guideway rail is less affected by temperature.

The cnc horizontal turning center bed is stable with minimal vibration.

The diameter of embedded parts reaches Φ 400mm.

Compared with iron casting HT300, mineral casting the vibration amplitude during cnc horizontal turning center machining is reduced by 20%.

For a 9.0x22.5 inch truck and bus wheel, rough and finish turning speed can be stable at 1000 pm.

Φ160 combined bearing. -High precision and rigidity.

Multi-wedge belt drive reduces the influence of the belt on high-speed rotation accuracy. -Multiple sealing structures to prolong service life.

HOW DOES CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB WORK?
CNC horizontal turning center adopts brake belt brake, which is mainly composed of brake wheel, brake belt, and lever. In the brake device, the brake wheel is a steel disc connected with the shaft by splines. A layer of steel mesh asbestos is fixed on the steel brake belt and the inner side to improve the friction coefficient. One end is linked with the spindle box, and the other end is fixed on the upper end of the lever. The brake belt of the horizontal lathe can be adjusted. The brake belt can be placed and adjusted by directly loosening the screw connecting the brake belt and the spindle box. When the CNC horizontal turning center is adjusted properly, the brake belt can be released when the spindle rotates, but when the clutch is released and the horizontal lathe is stopped, the brake belt holds the brake wheel tightly, so as to realize the rapid stop of the spindle and achieve braking.

WHAT IS A CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB USED FOR?
DEED CNC Horizontal Turning Lathe Center HP800-WC for wheel machining application: Passenger car wheel, truck, and bus wheel machining first procedure, a second procedure, finish turning to the machine. After the coating of some passenger, wheels is completed, the "finish turning" process is required for side A (front). According to different processes, it can be divided into the following "finish turning": bright surface, super-bright surface, sub mirror surface, and mirror surface. The general criteria for evaluating the "finish turning" ability of wheel machining machine tools: clear and uniform lines, high finish, no light, and dark lines, no over cutting, etc.

CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB SPECIFICATION

HTC800

HTC900

Most Required CNC Machines

5 axis gantry type machining center

Horizontal boring and milling center

CNC drill tap machine

Planer type horizontal boring machine

Horizontal machining center with pallet changer

  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Europe,Middle East,Americas
  • Founded Year:2008
  • Address:North of Yong'an Road, Industrial Development Zone, Yanzhou District, Jining City,Shandong Province
  • Contact:deed machinetool
*Your name:
*Your Email:
*To:Shandong Deed Precision Machine Tool Co.,Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

CNC Lathes Turning Centers Quest Series High Performance

The QUEST GT27SP gives you the productivity you demand for lean manufacturing with the Hardinge-exclusive patented interchangeab ...

Hardinge

VL-160C Heavy Duty Series CNC Vertical Lathe / Turning Center

Specifications Max swing dia.: 2000mm special purpose machine ...

honorseiki