Tobee® Expeller F028A05 is for the 8/6 AH Hi-seal slurry pump, It is also one of the important parts of the slurry pump, and be combined with the decompression cover to form the dynamic seal of the slurry pump. It is one of the three types of shaft seals of the slurry pump. Below we will briefly introduce the expeller of the slurry pump:
Slurry Pump Expeller is a very important slurry pump part if the expeller seal is selected for the slurry pump. It can not only help seal the slurry pump, but also reduce the centrifugal force. The design and material of expeller is significant to its service life because it is also one of the wet parts, Tobee offers expeller in cast iron and high chrome materials for options.
Slurry Pump impeller is one of the most important parts of centrifugal slurry pump. Depending on site application, slurry pump impeller selection can be crucial to pump performance. Slurry applications can be especially hard on the impeller of slurry pump because of their ...
Tobee® AHLSTAR APP Centrifugal Pumps are used in environments with corrosive fluids, in the presence of abrasive materials in water, as well as with paper stocks and chemical slurries. 1.AHLSTAR A end-suction single-stage centrifugal process pumps are used for demanding ...
Tobee® Spare Parts Labyrinth D062E62 Tobee offered slurry pump labyrinth Except for the wetted parts, the pumps also are composed of many other wear parts, such as expeller, expeller ring, pump case, shaft sleeve, mechanical seal, shaft, bracket, bearing assembly Slurry Pump ...
Throatbush F6083WRT1A05 Slurry Pump Throat Bush is interchangeable with AH/HH/L/M slurry pump ...
Impeller GAM14145HE1-A05 is used for 16/14 AH slurry pump. Slurry Pump impeller Tobee® offers three different types of slurry pump impellers: open, closed, and semi-closed. Each has its own strengths and weaknesses, depending on the application. Some are better for solids ...
Tobee DH2041MA05 back liner is the Slurry Pump Wetted End Parts for 3x2D HH. Slurry Pump Frame Plate Liner Insert ...
SL35029A05 Expeller Ring is used for 350S-L Slurry Pumps, It is an important Hi-seal wearing spares of slurry pump. Slurry Pump Expeller Ring ...
Tobee® Expeller F028A05 is for the 8/6 AH Hi-seal slurry pump, It is also one of the important parts of the slurry pump, and be combined with the decompression cover to form the dynamic seal of the slurry pump. It is one of the three types of shaft seals of the slurry pump. ...
Spare Pump Parts C004M bearing house is used for 3/2C-AH pump and 4/3C-AH pump. Slurry Pump Bearing Housing Slurry pump shaft, slurry pump bearing housing, slurry pump bearings, slurry pump end cover, and slurry pump labyrinth, etc.assembled a slurry pump bearing assembly, and ...