Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity
drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11
centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is
usually used as clean water pump.
Mission Sandmaster Pump
MissionSandmaster Centrifugal Pump Performance Parameters:
Model |
Impeller
dia. |
Speed
(r/min) |
Capacity
(m3/h) |
Head
(m) |
Efficiency
(%) |
NPSH
(m) |
Power
(kw) |
4x3x13 | 13’’ | 1450/1750 | 60 | 22-28 | 65 | 4.0 | 15/22 |
12’’ | 1450/1750 | 50 | 22-28 | 65 | 3.5 | 15/18.5 | |
11’’ | 1450/1750 | 35 | 22-28 | 65 | 3.5 | 11/15 |
Typical Configurations:
3x2x13 6x5x14
4x3x13 8x6x11
5x4x14 8x6x14
6x5x11 10x8x14
Typical
Applications:
• Mud mixing and shearing
• Desanding and desilting
• Degassing
•
Supercharging
• Centrifugal feed
• Mud cooling towers
• Wash-down
• Chemical,
refinery, industrial, construction and agricultural applications
• Underground Construction
Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal ...
Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the ...
Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the ...
SPECIFICATIONS: • Sizes from 3x2x13 to 10x8x14 • Flow rates from a few gallons per minute up to 2,600 GPM • Head pressure up to 550 feet • Best utilized for applications requiring up to 200 HP Design Features: • Up to 50% more capacity from the 8 x 6 pump • Optimum ...
Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal ...
Tobee®Mission Sandmaster 高跟鞋 Mission 离心式 Sandmaster 泵适用于各种钻井砂泵应用。光轴泵,配套电机可提供7.5KW至90KW,转速为800、1000、1150、1450、1750至3500 RPM 50Hz或60Hz。 ...