Cooling Tower Gearbox For Marley

Place Of Origin: china

Minimum Order: 1

Packaging: N/A

Delivery: 15 Days

Marley gearbox reducer is a kind of reduction equipment used for china cooling tower. It adopts two-stage (spiral bevel / spiral) gear to reduce the speed. Its structure is simple and reliable. Compared with low-level gear set, it has longer service life and reduces the sound by more than 30%.

Repair And Daily Maintenance Of Marley Cooling Tower Gearbox

Attention should be paid to the maintenance of wet and dry cooling tower gearbox: keep the gear reducer clean and dust-free. Always check the appearance of the marley gear reducer for misaligned parts. Thickener reducers usually check whether the bearings have been replaced or refueled, and check the incoming terminals.

If the gear condition is to be maintained, the gear reducer of thickener will run continuously, so routine maintenance is very important. Thickener reducer gear reducer work, please pay attention to the working environment, do not excessive turbulence, so as not to damage or shorten the gear reducer.

Check the appearance, whether the fan works normally, whether there is abnormal vibration, whether the coupling is reliable, whether the base is fixed, whether the bearing works normally (listen to the sound), whether the temperature is normal (infrared thermometer), whether the current is normal (clamp type ammeter) the reducer must also check the carbon brush and slip ring. If on the one hand there is an abnormality, the gear reducer must be repaired quickly.

Maintenance Method Of Cooling Tower Gearbox For Marley

a. The selected power is too large; Solution: re select or add cooling device

b. The bearing is overheated; The reason is that the axial clearance is too small; Solution - readjust the bearing clearance.

c. Poor lubrication (too slow speed, less oil and others); Solution - oil properly or use other lubrication methods.

d. The coaxiality error of coupling is too large; Solution - adjust the coupling.

e. Premature wear and broken teeth of gears; The reason is the excessive power; Solution - retype.

If you want to know more information about cooling tower gearbox repair, please visit our website.

Country: China (Mainland)
Business Type: Manufacturer
Market:
Founded Year:
Address:Lingjiang Village,Dongguan Street,Shangyu District,Shaoxing City, Zhejiang Province,China(Mainland)
Contact:AUVC .com

cooling tower gearbox for marley

more images of Cooling Tower Gearbox For Marley

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Zhejiang Aoshuai Refrigeration Co., Ltd
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters : 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

Round Counter Flow Cooling Tower(AB)

Round Cooling Tower

Open Circuit Cooling Tower

Mechanical Draft Cooling Tower

Cooling Tower Fan For Marley

Cooling Tower Air Inlet Louvers

The cooling tower air inlet louver is also called air inlet grille, which is used to replace the air inlet shutter of the old cooling tower. The air cooler louvers is used by many cooling tower manufacturers because of its anti splash and anti sunlight. The cooling tower air ...

Zhejiang Aoshuai Refrigeration Co., Ltd

Cross Flow Cooling Tower

Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross flow cooling tower working: The water flows vertically from the top of the tower, and the air flows horizontally through the filler. The air flow is orthogonal to the water flow in the cooling ...

Zhejiang Aoshuai Refrigeration Co., Ltd

40 Tr Cooling Tower

40 Tr Cooling Tower Closed Circular Cross Flow Cooling Tower(AHC) It refers to a cooling tower in which the cooling hot water passes through the packing from top to bottom, while the air flows through the packing from horizontal and oblique directions, and the flow direction of ...

Zhejiang Aoshuai Refrigeration Co., Ltd

40 Ton Cooling Tower

Closed Circular Cross Flow Cooling Tower(AHC) It refers to a cooling tower in which the cooling hot water passes through the packing from top to bottom, while the air flows through the packing from horizontal and oblique directions, and the flow direction of hot water and the ...

Zhejiang Aoshuai Refrigeration Co., Ltd