Perforated coils and sheets are ideal industrial and engineering materials for original equipment manufacturers. Perforated metal sheet in coils enable higher production efficiency for automated production operations by means of reducing handling of sheet material.
Perforated metallic coils can be supplied either fully perforated or paneled sections in a range up to 60" width in 16 gauge. Thinner coil sheets available to meet specific design and production requirements.
We are supplier of perforated coils specified as following.
Sheet in coil material: Aluminum, stainless steel, galvanized steel, galvannealed steel.
Size of sheet: width ranges 8”-12” , length ranges 30”-36”
Thickness:12 to 26 gauge.
Finish: No sharp edge, slots with margins
Perforated Coil with Round Holes Coil width: 2’3/4”, length 60’.
600 l/m x 1.06m wide x 1.5mm round hole 304 stainless steel perforated coil
Galvanized Perforated Coil
Ga 18
Ga 20
Perforated G90 Galv. PERFORATED G90 GALV. 18 GAGE X 42” COIL
¾” round hole 1”Staggered center
20”ID, ½” side margins
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A1011, Grade 50. Yield strength after cold-forming is 60,000 psi minimum. Posts are manufactured from hot-dipped galvanized steel conforming to ASTM A653, G90 or G140. The posts are ...
Perforated Sheet Metal Panels Cutting seam : the slit of the laser cutting aluminum plate is generally 0.1mm-0.2mm Cutting surface : the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation : laser processing laser slits are fine, ...
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A1011, Grade 50. Yield strength after cold-forming is 60,000 psi minimum. Posts are manufactured from hot-dipped galvanized steel conforming to ASTM A653, G90 or G140. The posts are ...
Cutting seam: the slit of the laser cutting aluminum plate is generally 0.1mm-0.2mm Cutting surface: the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation: laser processing laser slits are fine, fast, energy concentrated, so ...
Perforated custom laser cut aluminum panels Cutting seam : the slit of the laser-cut aluminum plate is generally 0.1mm-0.2mm Cutting surface : the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation : laser processing laser slits ...
Perforated metal tread plates are processing according to digital controlled holes and staggered distance on galvanized sheet, stainless steel sheet and other plates, it\'s processed via stamping according to the drawings provided by customers, which can prevent people from ...