Sandman® Mission Magnum I 8X6X14 Oilfield Drilling Pumps Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory ...
Tobee® Mission Magnum I Pumps • Cement ...
SPECIFICATIONS: • Sizes from 3x2x13 to 10x8x14 • Flow rates from a few gallons per minute up to 2,600 GPM • Head pressure up to 550 feet • Best utilized for applications requiring up to 200 HP The Magnum has an open impeller design that contains wide-tipped vanes and a ...
Tobee® Slurry Pump Stuffing Box , a slurry pump stuffing box And Slurry pump stuffing box Slurry Pump When centrifugal pumps were developed there was a need to prevent the pumpage from pouring out thru the open clearance between the pump casing back and the rotating shaft, ...
Tobee® 8x6 E-AH Pumps E078C23 Stuffing Box Spare Parts. Slurry Pump Stuffing Boxis one of shaft seal parts in gland packing seal pumps where the packing is housed in. The packing area of stuffing box is longer than expeller ring, so it can contain more packing. Slurry pump ...
Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the ...
Tobee®Mission Sandmaster Pumps Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model ...
6/4D-AHR Rubber Lined Slurry Pump is similar to 6x4D-AH Metal Lined Slurry Pump in structure. The main difference between AH and AHR is the material of wet parts, which are natural rubber, synthetic rubber or other wear-resistant rubbers. The Rubber Lined Slurry Pumps are more ...
2/1.5B-AH Slurry Pump is designed for handling highly abrasive,high density slurries with excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. It widely used for Pipeline transport, High velocity hydraulic transport, ...
SPECIFICATIONS: • Sizes from 3x2x13 to 10x8x14 • Flow rates from a few gallons per minute up to 2,600 GPM • Head pressure up to 550 feet • Best utilized for applications requiring up to 200 HP Design Features: • Up to 50% more capacity from the 8 x 6 pump • Optimum ...