UAV Motor Series

FOB Price
USD $100.00 / Piece
Place Of Origin
china
Minimum Order
1
Packaging
N/A
Delivery
15 Days
Direct mount propeller or Hub style compatible
Multi-length mounting hardware included
High Power N42sh magnets
Precision NMB bearings

12v Brushless Motor Series
Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher this number is, the more efficient the motor.

High thrust drone motors are important to look at efficiency through the whole throttle range though, not just the top end. Some motors might be efficient at lower throttle but could lose efficiency by drawing increasingly higher current as they approach their limits.

With less efficient motors not only are you wasting energy and flight time, your batteries might also suffer from voltage sag, this effect will be compounded if you are using poor quality LiPo batteries.

Remember that Watt is calculated by multiplying voltage and current, as we know the voltage of the battery we will be using. Another good way to look at efficiency is to use gram/amp (thrust/current).

Generally, the more thrust generated, the larger the current drawn to produce that thrust, so uav motor with high thrust and low current are preferred. Inefficient motors either generate too little thrust or draw too much current.

If you want your plane to fly longer, we suggest that you consider these motors.
U series motors are designed specially for long flight time drones. These motors are highly efficient, light, and run smoothly.
With the guarantee of strength, the caps of U motors are highly hollow-cutted to save weight, so that these motors can reach maximum thrust to weight ratio and gain more flight time.
U series motors are tested with the strictest procedures of TTF’s QC protocols. Each of these motors are dynamically balanced with our high-test standard. The axial and radial runouts of each rotor are tested strictly
Features:
• High Power N42sh magnets
• Precision NMB bearings
• 0.2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included

U2212/ U3506/ U5208 motors are applicable for 300-500mm class multirotor.

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. We provide drone frame kit, fastest drone motors and etc. For more information, please feel free to contact us!

  • Country: China (Mainland)
  • Business Type:
  • Market:
  • Founded Year:2015
  • Address:NO.15 Chaoyang road, Yanluo street, Songgang town, Baoan District, Shenzhen
  • Contact:szttfuav .com
more images of UAV Motor Series
*Your name:
*Your Email:
*To:Shenzhen TitanFlying Technology Co., Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

KE300A-04 Series Single-Phase Motor Inverter
KE300A-04 Series Single-Phase Motor Inverter

KE300A-04 single phase inverter drive, based on the world\'s leading speed sensorless high-performance vector core control algorithm, combined with the unique start-up and control requirements of variable speed single phase motor, using a new magnetic flux vector control ...

Shenzhen MICNO Electric Co., Ltd.

KE300A-04 Series Single-Phase Motor Inverter
KE300A-04 Series Single-Phase Motor Inverter

KE300A-04 single-phase motor series special inverter, based on the world\'s leading speed sensorless high-performance vector core control algorithm, combined with the unique start-up and control requirements of single-phase motor, using a new magnetic flux vector control ...

Shenzhen MICNO Electric Co., Ltd.

Sauer Danfoss 90M Series Hydraulic Motor
Sauer Danfoss 90M Series Hydraulic Motor

A&S Hydraulic Co., Ltd. supplies Sauer Danfoss Hydraulic Motors. Sauer Danfoss Hydraulic Motor 90M Series models: T90M075NC0NDN06W00MIX0000F0 90M055NC0N8N0C6 90M055NC0N8N0C6N00NNN000 90M055NC0N8N0C6W00NNN000024 90M075NC0N8N0S1W00NNN0000E6 90M100NC0N7NC7W00NNN0000F3 ...

A and S Hydraulic Co., Ltd

Hagglunds CB Series Hydraulic Motor
Hagglunds CB Series Hydraulic Motor

A&S Hydraulic Co., Ltd. supplies Hagglunds CB Series Hydraulic Motors. Contact Us A&S Hydraulic Co., Ltd. Email: hydraulic@esmachinery.com hydraulic@as-hydraulic.com https://hydraulic-pump-valve.com/ Cell/WeChat: +86-17311725072 Tel: +86-28-65238360 Fax: +86-28-86129221 No. ...

A and S Hydraulic Co., Ltd

Hagglunds CA Series Hydraulic Motor
Hagglunds CA Series Hydraulic Motor

A&S Hydraulic Co., Ltd. supplies Hagglunds CA Series Hydraulic Motors. Contact Us A&S Hydraulic Co., Ltd. Email: hydraulic@esmachinery.com hydraulic@as-hydraulic.com https://hydraulic-pump-valve.com/ Cell/WeChat: +86-17311725072 Tel: +86-28-65238360 Fax: +86-28-86129221 No. ...

A and S Hydraulic Co., Ltd

DC Motor Series 4KW SJ40A
DC Motor Series 4KW SJ40A

Location: China Business Type: Manufacturer, Exporter Brands: SHINJUESS, OEM Certificate: CE, ISO9001, CCC Terms of payment and delivery: Pay 30% deposit before producing and70% balance against copy of documents Minimum order quantity: No minimum  Price: Consultation Packing ...

Taizhou Shengjiang Electromechanical Co., Ltd.

DC Motor Series 3KW SJEZ1814-30A
DC Motor Series 3KW SJEZ1814-30A

Location: China Business Type: Manufacturer, Exporter Brands: SHINJUESS, OEM Certificate: CE, ISO9001, CCC Terms of payment and delivery: Pay 30% deposit before producing and70% balance against copy of documents Minimum order quantity: No minimum  Price: Consultation Packing ...

Taizhou Shengjiang Electromechanical Co., Ltd.

Sauer Hydraulic Motor 51V Series
Sauer Hydraulic Motor 51V Series

Sauer Hydraulic Motor 51V Series Type: Axial piston motor with variable displacement bent axis design Series 51 and 51-1 Size: 060 080 110 160 250 Series 51 and 51-1 variable displacement motors are bent axis design units, incorporating spherical pistons. These motors are ...

Jinan Fucheng Hydraulic Equipment Co., Ltd