Rtv Molding Silicone Rubber For Plaster Products

RTV molding silicone rubber for plaster products feature:

(1) RTV molding silicone rubber for plaster products with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

RTV molding silicone rubber for plaster products datasheets:

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( A0 )	Tensile-strength	Tear-strength	Viscosity (mPas)	Shrinkage rate (%)	Elongation (%)
630#	white	100 :5	30-40	3-5	29-31	49kgf/cm2	≥ 33kgf/cm	27000	≤0.3%	490%
Dowcorning3481	white	100 : 5	30-45	5-6	22-25	4.6Mpa	23kN/m	25000	≤0.5%	520%
Bluestar (3325 /585)	white	100 : 5	20-60	6-24	25-28	4.2Mpa	26kN/m	35000	≤0.7%	440%
Wacker®M4503	white	100 : 5	30-90	10-20	25	5.0(N/mm²	> 20N/mm	40000	≤0.5%	350%
SmoothonMoldMax®25	white	100 : 5	45	24	25	577psi	130pli	25000	002 in./in.	375%

RTV molding silicone rubber for plaster products operation way:

Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping.Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.

Step Three: Brushing cast & Perfusion Molding operation

Need any help on silicone rubber, please feel free to contact Mskaka:

Tel:86-755-89212365

Mob/Whatsapp:86-18938867528

E-mail: hyk(at)resinpu(dot)com

Skype:hyk(at)resinpu(dot)com

Country: Afghanistan
Business Type: Manufacturer
Market: Americas
Founded Year: 1998
Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China
Contact: ivy tan