Specification:
Speed range(rpm)
|
0-4000rpm adjustable
|
Max Capacity(ml)
|
24*15ml
|
RCF range (xg)
|
0-2870xg adjustable
|
Noise(dBA)
|
≦58dB(A)
|
Time range
|
1-99minutes adjustable
|
Speed accuracy
|
±20r/min
|
Dimension(mm)
|
510*400*280mm
|
Net weight(without rotor)
|
28KGS
|
Power supply
|
AC220-240V,50/60HZ,2A,0.2KW
|
Features:
-
Wide application range, can be used for serum separation, fat extraction, laboratory use
-
Exquisite workmanship, high-quality stainless steel cavity, high-quality alloy pendants
-
High-quality steel body, intelligent control system
-
Clear digital display, easy to operate
-
Brushless durable motor, no maintenance, adjustable speed up and down, memory program speed, time can be set freely.
-
Safe and durable, electronic and mechanical safety locks. Double protection, automatic machine shutdown when opening the cover, all-steel body, long service life.
How to use:
-
First, add the centrifuge tubes equipped with this machine to the materials to be separated, and insert them into the centrifuge holes respectively. The quality of the substances added to
each centrifuge tube must be basically the same.
-
Close the cover, turn on the power, and select the required speed and working time according to the instructions on the panel.
-
Press the approval button and the start button again, and the centrifuge will start to work at this time. When the set working time is reached, an alarm will sound automatically.
Matters needing attention:
-
It is strictly forbidden for various liquids or other debris to enter the centrifugal working chamber, otherwise it will damage the host.
-
The case of the instrument should be properly grounded to avoid accidents caused by the influence of moisture.
-
Please do not open the upper cover at will when the centrifuge head is running at high speed.
-
When the wrong product is selected to be approved, it should automatically alarm to remind you to re-select the approved product.
-
Before using the centrifuge, ensure that each test tube is placed diagonally and symmetrically, and the weight should be consistent. The use of electronic balance for weighing can better
play a better role in machine maintenance.